TDP-P75
Service Manual
7.3. SERVICE ADJUSTMENT
When replacing Main Board, adjustment procedure of
(1) DMD Bias voltage
(2) C/W index delay
(3) Calibration RGB
(4) Calibration YPbPr
should be applied.
When replacing
ENGINE
, adjustment procedure of
(1) DMD Bias voltage
(2) C/W index delay
should be applied.
When replacing DMD, adjustment procedure of
(1) DMD Bias voltage,
should be applied.
When replacing C/W, adjustment procedure of
(1) C/W index delay
should be applied.
When replacing C/W Sensor Board, adjustment procedure of
(1) C/W index delay
should be applied.
36/60
08/19/05
