28
29
Operations
■
The image adjustment menu
Use this menu to adjust image-related items.
Items Items that can be adjusted are marked with “Yes”, and those that cannot are marked
with “No”.
Item
Description
Computer Y/P
B
/P
R
Video
S-video
Contrast
Lower
Higher
Yes
Yes
Yes
Yes
Brightness
Darker
Brighter
Yes
Yes
Yes
Yes
Color
Lighter
Deeper
No
Yes
Yes
Yes
Tint
[Note 1]
Reddish
Greenish
No
No
Yes
Yes
Sharpness
Softer
Sharper
No
Yes
Yes
Yes
R-level
Less red
More red
Yes
Yes
Yes
Yes
G-level
Less green
More green
Yes
Yes
Yes
Yes
B-level
Less blue
More blue
Yes
Yes
Yes
Yes
Up/down shift
[Note 2]
Shift down
Shift up
No
Yes
Yes
Yes
Notes
1:
Tint
can only be adjusted when
Video mode
is
NTSC
or
NTSC4.43
.
2:
Up/down shift
can only be adjusted when
Screen size
is
Wide
. During the adjustment, the
picture may be instability.
■
The default setting menu
This menu shows placement status and other settings.
Set projection mode in accordance with Placement Style
Set the time to wait after signal input stops until turning off the power:
Off
(not turned off)
1 min 2 min ... 60 min
Set whether to turn on the power when the
ON/STANDBY
button is pressed
(Manual), or the main power switch is used (Auto).
Manual Auto
Set the lamp power
Standard Low
Set standby mode according to functions used
Standard Economy
Description
Item
Projection
mode
No signal
power off
Power on
Lamp power
[Note 1]
Standby mode
[Note 2]
(Back hung
from ceiling)
(Placed
on floor)
(Rear)
(Hung from
ceiling)
Note
1: When
lamp power
is set to
low
, the screen becomes a little darker, but the cooling fan noise gets
quieter. This setting will be cleared when you turn the power off.
Notes
• Note that if
Power on
is set to
Auto
, then if the main power switch is turned on when
power is restored after a power outage, the projector power will come on.
• Even if
Power on
is set to
Auto
, press the
ON/STANDBY
button to turn off the power.
Turning off the main power switch to cut off the power will shorten the life of the lamp.
■
The display setting menu
Use this menu to set screen display-related items.
(Full): Display with native resolution (1,024 x 768 pixels)
(Thru): Display with sampling resolution (for computer input)
(Wide): Wide-screen display (for Video, S-video, and Y/P
B
/P
R
)
Select one of the languages below to use for displaying menus and messages
[ : Enter setting mode] [ :Selection] [Apply: ]
English/Français/Deutsch/Italiano/Español/
Português/
/ / /
Screen to display when there is no input signal (Logo) (Blue) (None)
Display icons as function guides
On
Off
Display start-up screen when power turned on
On
Off
Description
Item
Screen size
Language
Background
Icon
Start-up screen
Note
• If “Thru” is selected for
screen size
, portions exceeding the native resolution will not
appear on the screen. Note that for RGB signals with clock frequency 140MHz or lower,
all input pixel signals are sampled. (This effect is noticeable when the screen is enlarged
using the Resize function
). However, if the clock speed is higher than this, the
RGB pixel signal is thinned before sampling.
■
Reset menu
(Special menu)
This menu is displayed when other menus are not displayed, and the
button is held
down until the menu appears.
• When the screen is placed vertically, and
Auto keystone correction
is executed, but
the keystone correction is not successful, stow the foot adjuster in its original position,
place the projector on a flat surface, select
Horizontal reference value reset
, and press
the
button.
• Select
Reset All
and press the
button to return all menu items to the factory settings.
Reset the horizontal reference value for Auto keystone correction
[ : Enter execution mode] [
Yes
No
] [Apply: ]
Reset all menu items to their factory settings
[ : Enter execution mode] [
Yes
No
] [Apply: ]
Description
Item
Horizontal reference
value reset
Reset all
Using the menu (Continued)
