User Manual
Page 7
Key Pad Features
Control Pads
Oper
ating
Instruc
tions
Comfort dehumidifying
operation on indicator light
Bucket full
indicator
light
Timer on/
indicator
light
High fan
indicator
light
Continuous operation
on indicator light
Auto defrost
operation
on indicator
light
lter
indicator
light
Pump models
only
LED
Display
When you push the button to change operation modes, the unit will make a beep sound to indicate
that it is changing modes.
CAUTION
Clean your unit occasionally to keep it looking new. Be sure to unplug the unit before
cleaning to prevent shock or re hazards.
NOTE
The appearance of the control panel may vary slightly by model.
COMFORT Button
Press to activate the comfort dehumidifying
PUMP Button(Pump models only)
Press to activate the pump operation.
NOTE: Make sure the pump drain hose is
installed into the unit and the continuous drain
hose is removed from the unit before the pump
operation is activated. When the bucket is full,
the pump starts to work. Refer to the next pages
for removing the collected water. Do not use
this operation when the outdoor temperature is
equel to or less than 0ºC (32ºF).
operation.
NOTE
When COMFORT function is turned on, set
humidity level is automatic and cannot be
changed manually.
NOTE
When CONTINUOUS function is turned on,
set humidity level is automatic and cannot
be changed manually.
FILTER Button
This feature is a reminder to clean the Air Filter
for more
operation. The LED (light)
will flash after 250 hours of fan motor operation.
To reset after cleaning the ter, press
the Filter button and the light will go o .
CONT (continuous) Button
Press to activate the continuous dehumidifying
operation.
