Toshiba TD-E432, Service Manual

Page: 19 / 80

19
source is USB, system will auto play USB function.
11.This function(Failover/Failback) is premised on
working automatically basically.
Usually, the source used by a primary is set as P1.It
is a backup function
to when the signal of P1 is lost.
Control
Setting
制御設
定
Off/ RS232/ LAN
オフ/RS232/LAN
OFF
(Off means uart communication is changed to
VGA port.(RD debug)
RS232 means uart communication is changed
to RS232C port.
LAN means uart communication is changed to
LAN port.)
Standby
Mode
スタン
バイモ
ード
ECO/Normal
省エネ/ノーマル
ECO
(Set the standby mode of LAN IC.
ECO means LAN IC is not workable when PID
is at standby mode. User can not use LAN
command to power on PID.
Normal means LAN IC is active mode when
PID is at standby
mode. User can use LAN command to power
on PID)
Ethernet Setting
イーサネット設定
(The portions are static and DHCP.
In static mode, user can set IP, Mask,
Gateway and DNS)
Sleep
Timer
スリー
プタイ
マー
Off, 5, 15, 30, 60,
90,120, 180 min
オフ, 5, 15, 30, 60,
90,120, 180 分
Enable
(Power down timer priority : scheduler > sleep
timer = no signal timer)
Power
Save
パワー
セーブ
Off,
30sec~300sec/30sec
steps
300sec
(Set the timer to power off PID when current
source has no signal.)
Software Update(USB)
ソフトウェアの更新(USB)
None
(Update the FW by USB.
The confirm OSD has YES or NO item.
Yes : update the FW.