– 2 –
CODE No. (DN) setting
Wired remote controller (RBC-AMS54E*)
Perform the advanced settings for the air conditioner.
Carry out the setting operation while the indoor unit is stopped. (Turn off the air
conditioning unit before starting the setting operation.)
1.
Push the [
MENU] button to display the menu screen.
2.
Push and hold the [
MENU] button and the [
] button at the same
time to display the “Field setting menu”.
Push and hold the buttons for more than 4 seconds.
3.
Push the [
] / [
] button to select “7. DN setting” on the “Field
setting menu” screen, then push the “
Set” [
F2] button.
The fan and louver of the indoor unit operate. When the group control is used, the
fan and louver of the selected indoor unit operate.
Move the cursor to select “DN code” with the “
” [
F1] button,
then set “B5” with the [
] / [
] button.
Move the cursor to select “data” with the “
” [
F2] button, then set
“0001” with the [
] / [
] button.
4.
Push the [
MENU] button to set the other DN codes. After “Continue?” is
displayed on the screen.
5.
Push the “
No” [
F2] button to finish the setting operation. “ ”
appears on the screen for a while, then the screen returns to the “Field setting
menu” screen.
Pushing the “
No” [
F2] button displays the unit selection screen
when the group control is used. Push the [
CANCEL] button on the unit
selection screen to finish the setting operation. “ ” appears on the screen for a
while, then the screen returns to the “Field setting menu” screen.
6.
Push the [
CANCEL] button to return.
6.Setting timer operation mode
7.DN setting
Field setting menu(2/2)
Return
Set
DN setting
Code
(DN)
Data
Return
B5
0000
Fix
<
>
DN setting
Code
(DN)
Data
Return
B5
0001
Fix
<
>
Set
<
>
Return
Continue?
No
Yes
DN setting
No
No
About the occupancy sensor
• Sometimes the sensor may not detect people even when they are present if their
movements are small.
• If something having a difference in temperature with the surroundings moves, the
sensor may detect people as present even if they are not present.
• A wired remote controller (RBC-AMS54E*) is required to use an occupancy sensor.
• Be sure to install an occupancy sensor in all indoor units if using group operation.
List of separately available products that cannot be used with
the occupancy sensor
The following separately available products cannot be used together with the
Occupancy sensor.
Product name
Model
Wireless remote controller kit
RBC-AX32UM(W)-E
EB99814101