– 1 –
1-EN
Thank you very much for purchasing TOSHIBA Occupancy sensor for Air Conditioner.
Please read this owner's manual carefully before using your Occupancy sensor for
Air Conditioner.
Request to constructor or dealer
• Please clearly explain the contents of the Operations Manual and hand over it.
Observe the safety precautions described in the Installation Manual supplied with the ceiling panel and air conditioner
(indoor unit).
Con
fi
guring an Occupancy Sensor
Be sure to set operations for “Occupancy sensor operation” and “Operation during absence” as described
below.
• An “Occupancy sensor” can detect whether people are present or not present.
If people are not present, the air conditioner automatically operates in an energy saving mode.
Occupancy sensor setting
1.Occupancy sensor operation
2.Operation during absence
Return
Fix
Invalid / Enable
Standby / Stopped
1
Push the [
MENU] button to display
the menu screen.
2
Push the [
ޔ
] / [
ޕ
] button to
select “Occupancy sensor setting” on
the menu screen, then push the
“
Set
Set” [ F2] button.
Item
Function
Occupancy sensor operation
You can decide whether to disable the occupancy sensor or select the time
required to determine that people are not present.
Factory default setting is 60 minutes for determining time. You can select
Disable, 30 minutes, 60 minutes, 90 minutes, 120 minutes, or 150 minutes.
Operation during absence
You can select the operation of the air conditioner when people are not
present. Standby: Circulation mode (thermostat OFF)
Stopped: Stops the air conditioner
NOTE
If an occupancy sensor has not been connected, “ No function” is displayed.
