Central remote controller
Owner’s Manual
36
-EN
●
NOTE
If necessary, set the temperature, operation mode (Cool/Heat). (P.38)
Start/Stop Operation of All Air to Water Heat Pump in a Zone
1
Display the “Zone” screen. (P.16)
2
Press [
∧
] [
∨
] [
<
] [
>
] to select a Zone.
The selected Zone is highlighted.
To start
3
Press [
].
The confirmation screen is displayed.
4
Press [
∧
] [
∨
] to select “Yes”, then press [ ] (Confirm).
All Air to Water Heat Pump in the selected Zone start operation and
changes to
.
To stop
3
Press [
].
The confirmation screen is displayed.
4
Press [
∧
] [
∨
] to select “Yes”, then press [ ] (Confirm).
All Air to Water Heat Pump in the selected Zone stop operation and
changes to
.
3
3
2, 4
(Start)
(Stop)
