Central remote controller
Owner’s Manual
20
-EN
4
Basic Usage
4-1. Air conditioner
This section explains commonly used functions such as starting/stopping air conditioner operation, set temperature, and
operation mode.
●
NOTE
• If necessary, set the temperature, operation mode (Cool/Heat, etc.), fan speed, and louver. (P.23)
• Air to Water Heat Pump is not included in the control target when operation is carried out all at once.
Start/Stop Operation
CAUTION
Always turn off the power circuit breaker if the product malfunctions due to lightning or wireless, etc. during
operation. (Cause of failure)
Start/Stop Operation of All air conditioners
1
Display the “All” screen. (P.15)
To start
2
Press [
].
The confirmation screen is displayed.
3
Press [
∧
] [
∨
] to select “Yes”, then press [ ] (Confirm).
All air conditioners start operation, and the Run lamp lights up.
To stop
2
Press [
].
The confirmation screen is displayed.
3
Press [
∧
] [
∨
] to select “Yes”, then press [ ] (Confirm).
All air conditioners stop operation, and the Run lamp turns off.
2
2
3
Run lamp
(Start)
(Stop)