Central Remote Controller
Installation Manual
3
-EN
1
Safety Precautions
• Read these "Safety Precautions" carefully before installation.
• The precautions described below include important items regarding safety. Observe them without fail.
Understand the following details (indications and symbols) before reading the body text, and follow the instructions.
• After the installation work has been completed, perform a trial operation to check for any problems. Explain how to use and
maintain the unit to the customer.
• Ask customer to keep this Manual at accessible place for future reference.
Display Description
Symbol Description
WARNING
Indicates "Content that is expected to
result in death or serious injury (*1) to the
user in the case of incorrect handling".
indicates prohibited actions. Specifically
prohibited contents are indicated with a
picture and/or text in or near the symbol.
CAUTION
Indicates "Content that is expected to
result in minor injury (*2) to the user or
damage to property (*3) in the case of
incorrect handling".
indicates instructions which must be
followed. The actual contents of the
instructions are indicated with a picture and/or
text in or near the symbol.
*1
:
Serious injury refers to lasting after effects such as blindness, injury, burns (high temperature / low temperature), electric shock, bone
fracture, or poisoning, etc. and injuries that require hospitalization/long-term outpatient treatment.
*2
:
Minor injury refers to injuries, burns, or electric shocks, etc. that do not require hospitalization or long-term outpatient treatment.
*3
:
Damage to property refers to extended damage related to houses, household goods, livestock, or pets, etc.
WARNING
Prohibited
Do not modify the unit.
A fire or an electric shock may occur.
Compulsory
•
Ask an authorized dealer or qualified
installation professional to install or
reinstall this unit.
Inappropriate installation may result in
electric shock or fire.
•
Electrical work must be performed by a
qualified electrician in accordance with
this installation manual.
The work must satisfy all local, national
and international regulations.
Inappropriate work may result in electric
shock or fire.
•
Be sure to turn off all main power supply
switches before starting any electrical
work.
Failure to do so may result in electric shock.
Compulsory
Always connect to ground
Improper grounding may result in an electric
shock.
Before connecting the power, carry out Class D
grounding according to the "Engineering
Standard for Electric Work" and the "Internal
Wiring Regulations".
CAUTION
Prohibited
Do not install in the following locations
• Locations where combustible gas may leak
• Locations with high humidity or water
• Dusty locations
• Locations in direct sunlight and locations
subject to high temperatures
• Locations within 1 m from televisions or
radios
• Outdoors, under awnings, or other locations
exposed to rain and dew
• Locations exposed to outside air containing
corrosive gases or salinity
• Locations with frequent vibrations
Compulsory
•
In installation work, use wiring with the
correct ampacity.
Failure to do so may result in excessive heat
or fire.
•
Use specified cables and connect them
securely, and do not subject connecting
terminals to external force.
Doing so may result in broken cables,
excessive heat or fire.
•
Always install a circuit breaker on the
primary side of the power supply.
•
When attaching to a metal lath, wire lath
or wooden structure with metal boards,
attach it to the control panel, etc. without
attaching it to the wall.
Summary of Contents for TCB-SC640U-E
Page 35: ...DEB5219151 2 ...
