Toshiba Stratagy ES48, User Manual

Page: 94 / 148

Using Stratagy ES with a Strata CIX/CTX
Call Forward
82
Stratagy ES User Guide 04/05
³
To use the Call Forward button sequence
³
Follow the instructions in Table 1 below shown under “Button Sequence.” Some
features require additional input, such as:
•
Destination
– If the destination is an outside number, press after entering the
destination. The CIX/CTX accepts destination numbers of up to 32 digits.
•
Timer
– This is a two digit entry representing how long (8 to 160 seconds) your
telephone should ring before forwarding the call. If you enter one digit, you
must press
after entering the single digit.
Also, in the following table, (Tone) means that a confirmation tone plays at that point
in the sequence.
Table 1 Call Forward Procedures
Feature Button Sequence
Call Forward - Station
Call Forward Any Call (Internal and Incoming Line)
All Call Press Extension (Tone) + Destination No. (Tone)
Busy Press Extension (Tone) + Dest. No. (Tone)
No Answer Press Extension (Tone) + Dest. No. (Tone) + Timer +
Busy No Answer Press Extension + Dest. No. + Timer +
Cancel Press Extension (Tone)
Call Forward - System
Call Forward - Incoming Line Calls
All Calls Extension (Tone) + Dest. No. (Tone)
Busy Extension (Tone) + Dest. No. (Tone)
No Answer Extension + Dest. No. (Tone) + Timer (Tone) +
Busy No Answer Extension + Dest. No. (Tone) + Timer (Tone) +
Cancel Extension (Tone)
Call Forward - System
Activate #620 (Tone)
Cancel #621
(Tone)