manualshive.com logo in svg

Toshiba STRATA CIX, Programming Manual

The Toshiba STRATA CIX is a cutting-edge telecommunications system, designed to enhance communication and productivity in business environments. Easily navigate its features and functions with the comprehensive User Manual, available for free download from manualshive.com. Maximize the potential of your STRATA CIX with this user-friendly manual.

Share
Download
background image

Strata CIX Voice Mail Programming    01/07

10-1

A

d

va
n

c

e

d

 In
te

gr
at

ion

s

 

a

n

d Ap

pl

ic

ati
o

n

s

Advanced Integrations and
Applications

10

This chapter covers procedures for enabling and testing Simplified Message Desk Interface 
(SMDI), Audio Messaging Interchange Specification (AMIS) for the voice mail, CTX Proprietary 
Integration for the Stratagy ES/Strata CIX, and Voice Profile Internet Mail (VPIM) for the 
Stratagy ES.

CIX Integration

With the Stratagy ES software application on the MAS and Strata CIX, all integration 
communication is performed over the IP network connection between the two systems.

All Stratagy ES systems require a network connection to facilitate the integration.This section 
provides the steps needed to configure the Stratagy ES for this integration.

Note

For additional information, see 

“Proprietary Integration” on page 1-7 

.

You can perform the two wizards—Configuration Wizard and User Setup—in the eManager/Basic 
Configuration menu or you can follow the steps below to configure your Stratagy ES system.

Step 1: Program CIX for Integration

The following Strata CIX programs must be configured for Voice Mail to work with the CIX:

Set up Telephone Station Ports

•

From eManager, click Advanced Configuration > Station > Assignments and configure Program 
200 Station Assignments (or VMID Wizard) for the following:

•

FB19 – VM ID sent to Voice Mail = mailbox number. This is usually the same as the PDN, 
however, it can be different (do not include 91, or 92 Vmail integration codes).

•

FB22 – Message Center (this is VM distributed hunt group pilot number

Optional Station Programming

•

From eManager, click Advanced Configuration > Station > Assignments and configure Program 
204 Station Assignments DKT Programming

•

FB23 – Used for the Record to VM feature. Default setting is “Manual” and may be 
changed to “Auto.”

Summary of Contents for STRATA CIX

























































































































































































































































Reviews:

No comments

Related manuals for STRATA CIX

THORLABS Vytran LFS4100 User Manual preview
Vytran LFS4100
Brand: THORLABS Pages: 44
iGuzzini B183 Instruction Sheet preview
B183
Brand: iGuzzini Pages: 20
JB-Lighting A8 Upgrade Manual preview
A8
Brand: JB-Lighting Pages: 40
Backyard Play Systems 4136 Manual preview
4136
Brand: Backyard Play Systems Pages: 74
Idmed ToFscan Quick Start preview
ToFscan
Brand: Idmed Pages: 2
Olympus CLV-160 Maintenance Manual preview
CLV-160
Brand: Olympus Pages: 56
Teac CD-RW880 Owner'S Manual preview
CD-RW880
Brand: Teac Pages: 44
Te Pari Racewell HD3 Quick Setup Manual preview
Racewell HD3
Brand: Te Pari Pages: 6
Yamaha Motif-Rack XS Code List preview
Motif-Rack XS
Brand: Yamaha Pages: 48
Yamaha CBX-D3 Owner'S Manual preview
CBX-D3
Brand: Yamaha Pages: 29
Wacker Neuson BS Operator'S Manual preview
BS
Brand: Wacker Neuson Pages: 34
Jefferson JEFTRCH21 User Manual preview
JEFTRCH21
Brand: Jefferson Pages: 2
Lighthouse Lightning Bolt Instruction Manual preview
Lightning Bolt
Brand: Lighthouse Pages: 2
Softing IT Networks LinkXpert Manual preview
LinkXpert
Brand: Softing IT Networks Pages: 54
Velp Scientifica UDK 139 Operating Manual preview
UDK 139
Brand: Velp Scientifica Pages: 123
IKA 06-5819 Operating Instructions Manual preview
06-5819
Brand: IKA Pages: 48
AMVAC SmartBox Parts And Operator'S Manual preview
SmartBox
Brand: AMVAC Pages: 81
Topcon MC-4S User Manual preview
MC-4S
Brand: Topcon Pages: 76

Brands by name

Popular brands

Load more brands