
Programming
Businesses Save Money with Toshiba’s New SIP Trunking Feature
7 of 14
Creating the Channel Group
1.
Go to IP Telephony > SIP trunking. The first tab is Channel Group setting, Program 326.
2.
Channel Group Setting - In this example SIP Trunk Channel Group 8 is created.
3.
FB01 - Equipment Number - Enter the Cabinet number and slot number (four digits). In this example
0203.
4.
FB02 - LAN interface number = 1 (MIPU only has one interface)
5.
FB03 - Strata Net Channels – The TOTAL number of ports on this card that are going to be dedicated
to SIP Trunking. On further tabs, each OLG or ILG can be for a different service provider and still be in
the same channel group. This entry is the total number of trunks from ALL the service providers
6.
FB04 - RBT tone on incoming call - Enable for the CIX to provide RBT (ring back tone). Coordinate this
response with the Internet Service Provider (ISP) trunk provider