Least Cost Routing
Program 51 LCR Local/STD/International Codes Route Plan Assignment Plans
01~08
5-16
Strata DK40 Programming Manual Spring 1999
Program 51 Overview
Every route plan can be assigned to define a set of dialling codes. A code can only be
assigned to one STD/International code table. Assigning the code to one table and then
assigning it to another would remove it from its first table.
◆
The purpose of Program 51 is to define which dialling code calls are placed over
which LCR Route Plan Number (1 ~ 8). Initialised data assigns all possible area
codes (0000 ~ 9999) to LCR Plan 8. When entering the dialling codes into the
selected Plan tables the system automatically allows for the leading ‘0’. For example
to enter the code 01932 the data would be 1932. Four digits must be entered (
).
◆
As soon as a dialling code is entered in a LCR Dial code table for any of the plans
1 ~ 7 it is automatically deleted from Plan 8. An area code cannot be lost. If it is
subsequently deleted from Plans 1 ~ 7, LCR software automatically adds it to back
to Plan 8.
◆
To fill in record sheets for Plans 1 ~ 7.
◆
Select the codes to be entered for the specific Route Plan.
◆
Enter the applicable dialling codes (not including the leading ‘0’), four digits per
code entry. A string of dialling codes can be entered see the notes at the bottom of
the System Record Sheet for the relevant procedure.
You have now established which dialling codes belong to which Route Plan.