You will continue to hear intercom dial tone.
Station Speed Dial codes are 1 0 ~ 4 9, and System Speed Dial codes
are 6 0 ~ 9 9. (Dial tone continues as you dial the access code.)
The system will automatically dial the telephone number assigned to the
access code.
TONE/VOICE FIRST SIGNALING
Your STRATA DK system may be set for Tone Signaling or Voice First
Signaling as the standard intercom call signaling method for calls to
digital and electronic telephones. The Tone Signal consists of repetitive
ring tones, while the Voice First Signal consists of a tone burst followed
by the caller's voice. When you initiate a call, you can change to the
alternate signaling method. Standard telephones always ring with Tone
Signaling, no matter what the system signaling method.
If the signaling mode is set for Voice First Signaling, you will hear a
single tone burst. If the signaling mode is set for Tone Signaling, you will
hear repetitive ringback tone.
The call will begin to ring at the station, if you changed from Voice First
Signaling to Tone Signaling.
If you changed from Tone Signaling to Voice First Signaling, the call will
stop ringing and you will hear a tone burst. You can converse after the
tone burst.
CO LINE QUEUING
CO Line Queuing enables you to be placed in a waiting queue for a CO
line after dialing a line group in which all lines are busy. You will be called
back when a line in the group becomes available.
2. Dial
*
.
3. Dial the 2-digit Speed Dial
access code.
To Change the Signaling Mode:
1. Call a digital or electronic
telephone via intercom.
2. To change the mode, dial
1
.
STRATA DK STANDARD TELEPHONE
FEATURE OPERATION
1-15
