manualshive.com logo in svg

Toshiba SG20 - Magnia - Web Server, User Manual, Page: 24 / 331

Share
Download
Toshiba SG20 - Magnia - Web Server User Manual Download Page 24

Getting Started

You will also need

  24

2

Write the Magnia SG20 serial and part numbers on the convenient peel-off label 
located on the Quick Start card. 

3

Peel off the label and apply it to the side or base of the Magnia SG20. Avoid covering 
any ventilation holes.

For a detailed description of each component, see 

Finding your way around

 on page 24.

You will also need

❖

Network cables or wireless devices for connecting client computers to the Magnia 
SG20, and for connecting the Magnia SG20 to the Internet 

❖

Printer cable if connecting a printer to the parallel printer port

Finding your way around

This section explains the physical connections and screen displays of the Magnia SG20.

Front of the Magnia SG20

Locating the LCD display, status and power buttons

❖

The 

LCD display

 indicates that the Magnia SG20 is on, provides access to the public 

and private network IP addresses, and displays warnings if any of the hardware is at 
the point of failure.

You can configure the display to provide information about the status of your Magnia 
SG20 such as: modem status, the date and time the last backup was performed, the 
availability of software upgrades, and so on.

❖

The 

Status scroll button

 allows you to scroll through the information displayed on 

the LCD display.

❖

The 

Power/Shutdown button

 turns the Magnia SG20 on and off. When you turn off 

the Magnia SG20, a message prompts you to press the button again as confirmation.

LCD display

Status scroll button
Power/Shutdown button

Summary of Contents for SG20 - Magnia - Web Server












































































































































































































































































































































Reviews:

No comments