Toshiba SD46VSR Service Manual Download Page 10

Page: 10 / 138

One-Touch Timer Recording (OTR)

OTR 1 : 30

CH 29

“REC” will keep blinking

in the display.

VCR

VCR

CH 29

OTR 0:30

INDEX

REC

VCR

The one-touch timer recording feature
provides a simple and convenient way
to make a timed recording.

Note:
If the tape supply has not sufficed for OTR
recording, the clock symbol (

) will blink

at the tape-end and then VCR mode will
change to DVD mode.
In this case, press TIMER REC to cancel
the

blink or press EJECT on the DVD/

VCR to remove the cassette tape.

Preparation
• Turn ON the TV and set to the AV input mode.
• Press VCR to select the VCR mode. (The VCR indicator will

light.)

Load a blank cassette tape with the erase
prevention tab intact. (The DVD/VCR will
automatically turn on.)

Select the program(e.g.29) you want to record with CH +/– or
number buttons.
1~9 : e.g. 5 = press “5”
10~80 : e.g. 29 = press “2” and “9”.

If a recording in Long Play mode
is intended, press SP/LP to dis-
play "LP".

Press REC/OTR twice. The recording will start and stop after 30
minutes. Each additional press of
REC/OTR will increase the record-
ing time to a maximum of 6 hours
(See table below).

If REC/OTR is pressed once during the recording, the remain-
ing time appears on the screen. When pressed again, the re-
cording time is extended to the nearest 30-minute or 1-hour
interval.

To Extend the Recording Time

Press REC/OTR repeatedly until the
desired time appears on the display.

To stop the OTR

Press STOP.

00:00:00 LP

2:00

5:00

4:00

3:00

1:30

Recording

0:30

1:00

6:00

ENGLISH

TIMER REC SET

DATE

23 MON

11:30

- - : - -

START
END
CH

SELECT :
SET :
EXIT : MENU

SPEED

/ 0–9

23 MON
13:00

OK : ENTER

14:30

TIMER REC SET

DATE
START
END
CH

SELECT :
SET :
EXIT

: MENU

SPEED

--:--

------

--:--

------

--:--

------

--:--

------

--:--

------

--:--

------

--:--

------

--:--

------

/ ENTER

SELECT :
EXIT : MENU

....to be continued to next page

Timer Recording

Timer recording can be programmed
on the TV-screen with the remote con-
trol. The built-in timer allows automatic
unattended recording of up to 8 pro-
grams within 1 month.

Note:
In the event of a power failure the data of
the automatic recording will be maintained
in the built-in memory for about 30 min-
utes. Also, the clock will continue to run for
this period of time. Thereafter the data will
be deleted. When the power resumes, the
time display will change to “--:--” that the
timer setting will have to be set.

Preparation

• Turn ON the TV and set to the AV input mode.
• Press VCR to select the VCR mode. (The VCR indicator will light.)
• Load a video cassette with the erase prevention tab intact. Make

sure with CALL that the time and date are correct.(see page 31).

Example: Timer recording for channel 1, 13:00 to 14:30 with Tape
speed LP on timer program number 1.

Press VCR MENU. Press

to select TIMER REC SET.

Then press ENTER.

Each line stands for one pro-
gram of the 8 memories. Select
one line with

. Then

press ENTER.

Set the desired date with

or number buttons. Then

press

to accept it.

Set the Starting time (13:00),
ending time (14:30), channel
(1) and Tape speed (LP) in the
same way as the step 3.

• In case of an erroneous input

press

to go back to before

step and enter again.

Timer Recording

--:--

------

13:00

14:30

23 MON

--:--

------

--:--

------

--:--

------

--:--

------

------ --:--

--:-- --

------ --:--

--:-- --

SELECT :
EXIT : MENU

/ ENTER

TIMER REC SET

DATE

WKL-WED

11:30

- - : - -

START
END
CH

SELECT :
SET :
EXIT : MENU

SPEED

/ 0-9

--:--

------

--:--

------

--:--

------

--:--

------

--:--

------

25 WED 12:15

13:00

23 MON 13:00

14:30

LP
SP

SELECT :

/ ENTER

--:--

------

-- -

EXIT : MENU

Press ENTER to accept them.

To enter other pro-
grams, repeat steps
2 through 5.

• To return to the

normal screen,
press VCR MENU
twice.

MON-SAT = everyday from
Monday to Saturday
WKL-SAT = each Saturday

Press TIMER REC. The clock symbol (

) will

appear on the display and the DVD/VCR stands by
for recording. At the same time, VCR mode will
change to DVD mode automatically. You can use
DVD even if the VCR is in the Timer recording mode.
If you do not use the DVD, turn the power off.

• If the clock symbol (

) blinks in the display in

spite of the pressing of TIMER REC, the cassette
may not have been loaded yet. (see page 24)

• If the cassette is ejected in spite of the pressing

of TIMER REC, the erase prevention tab of the
cassette may have been removed. (see page 24)

Notes:
• In case of the timer recording from the scart socket,

proceed as follows: In step 4 press

repeatedly

until the "CH" line blinks. Then press AUX repeatedly
until “AV1” or “AV2” or “AV3” appears.

• If the clock symbol (

) blinks when the timer recording

ended, the TV program has not been completely
recorded because of an insufficient tape supply. Press
TIMER REC to cancel the timer program or press
EJECT on the DVD/VCR to remove the cassette tape.

• During timer recording standby mode, the VCR mode

cannot be selected. To use the VCR, press TIMER
REC at first, then press VCR to change to VCR mode.
After you use the VCR, press TIMER REC again to put
the VCR into timer recording standby mode.

Timer Recording Special Case

Weekly (e.g. WKL-TUE: each Tuesday) or daily (e.g.
MON-SAT: Monday to Saturday) Timer recording

Follow the procedure for timer recording on page 33. At
picture 3 press

repeatedly until the desired

setting appears. Then press

. When you press

repeatedly, the indicator at DATE will change as

follows, in case today is Friday.

In case of Timer programs-overlapping

Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as
shown in the diagram below.

Notes:
• The daily/weekly recording can be made continuously until

the recording is canceled or the tape reaches the end.

• During timer recording the automatic rewinding mecha-

nism does not function.

Confirmation / Cancellation of the Timer
Recording

If the Timer has been activated, now press TIMER
REC to deactivate the Timer. The clock symbol (

)

will disappear. Then press VCR to change to VCR
mode.

Press PROGRAM. All the 8 Timer memories will
appear.

To cancel Timer program: Press

to select

the written line. Then press CANCEL. This line is
now canceled.

Press VCR MENU (or PROGRAM) repeatedly until
the TV-picture appears.

One month later

minus one day

SUN-SAT 25 FRI ..... 24 SUN WKL-FRI

MON-SAT MON-FRI WKL-THU.....WKL-SAT

8 : 00

11 : 00

9 : 00

10 : 00

Program 1

Program 2

Program 3

Prog.1

Deleted Parts

Non Recorded Portion Parts

Prog.2

Prog.3

Recording
Control Settings

ENGLISH

NICAM OFF

NICAM M1/2

NICAM M1

NICAM ST

Stereo Recording and Playback

This DVD/VCR is capable of recording
sound in Hi-Fi system. The recording
will  be  performed  automatically.
NICAM  STEREO  broadcasts  are
recorded in its original sound system
regardless of the setting. If you wish
to record NICAM programmes, select
NICAM “AUTO” as follows.
And,  this  DVD/VCR  can  also  receive
and  record  German  A2  stereo  pro-
gram.  The  tape  recording  is  always
both  in  Hi-Fi  and  in  MONO  on  the
standard longitudinal track. In case of
bilingual TV programs always the two
audio channels will be recorded.

Note:
When listening to a stereo broadcast or
playing  back  a  Hi-Fi  tape  recorded  in
stereo,  you  have  to  connect  the  DVD/
VCR with the stereo audio system or the
stereo  TV.  The  sound  which  is  output
from the RF OUT jack is monaural.

Preparation:

• Turn ON the TV and set to the AV input mode.
• Press VCR to select the VCR mode. (The VCR indicator will light.)

NICAM stereo sound reception:

Press VCR MENU. Press

to select VCR SETUP.
Then press ENTER.

Press

to select NICAM.

Then press

or ENTER to

select [AUTO].

Press VCR MENU repeatedly until the TV picture appears.

NICAM programmes are divided into 4 types as shown
below.