background image

E

ng

lis

h

Introduction

18.  Do not use a cracked , deformed, or repaired disc. These discs are easily broken and may cause serious personal 

injury and apparatus malfunction.

19.  If the apparatus should smoke or smell, immediately disconnect the power cord from the wall outlet. Wait until the 

smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.

20.  While it is thundering, do not touch the connecting cables or the apparatus.

SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards but, like any electrical 

equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the 

points below for your own safety. They are of a general nature, intended to help you with all your electronic consumer

products and some points may not apply to the goods you have just purchased.

DO

 read the operating instructions before you attempt to use the equipment.

DO 

ensure that all electrical connections (including the mains plug, extension leads and inter- connections between 

the pieces of equipment) are properly made and in accordance with the manufacturer's instructions. Switch off and 

withdraw the mains plug before making or changing connections.

DO

 consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO

 be careful with glass panels or doors on equipment.

DON'T

 remove any fixed cover as this may expose dangerous voltages.

DON'T

 obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc.  

Overheating will cause damage and shorten the life of the equipment.

DON'T

 allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids, such as vases, 

to be placed on the equipment.

DON'T

 place hot objects or naked flame sources such as lighted candles or nightlights on, or close to equipment. High 

temperatures can melt plastic and lead to fires.

DON'T

 use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety always fit the 

manufacturer's approved stand or legs with the fixings provided according to the instructions.

DON'T

 listen to headphones at high volume, as such use can permanently damage your hearing.

DON'T

 leave equipment switched on when it is unattended unless it is specifically stated that it is designed for 

unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure that 

your family know how to do this. Special arrangements may need to be made for infirm or handicapped people.

DON'T

 continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any 

way - switch off, withdraw the mains plug and consult your dealer.

ABOVE ALL

  -NEVER let anyone especially children push anything into holes, slots or any other 

opening in the case - this could result in a fatal electrical shock;

  -NEVER guess or take chances with electrical equipment of any kind

  -it is better to be safe than sorry!

Summary of Contents for SD1010KE




























Reviews: