Toshiba SD-590KY Owner'S Manual Download Page 14

13

English

 CD-RW

 (CD-Rewritable)

 

Audio/Video format or 

 MP3/JPEG 

files.

 Audio 

CD

 (Compact Disc

 Digital 

Audio)

 Video 

CD

 

 

(Formats 1.0, 1.1, 2.0)

 

Super Video CD

 MP3-Disc

 

 is a trademark of DVD Format/Logo Licensing 

Corporation.

 

Because of problems and errors that can occur 
during the creation of DVD and CD software and/or 
the manufacture of DVD and CD discs, Toshiba 
cannot assure that this DVD player will successfully 
play every disc bearing the DVD and CD logos. If you 
happen to experience any difficulty playing a DVD 
and/or CD disc on this DVD player, please contact 
Toshiba Customer Service.

 

This DVD player requires discs/recordings to meet 
certain technical standards in order to achieve 
optimal playback quality. There are many different 
types of recordable disc formats (including CD-R 
containing MP3 files). Not all recordable discs will 
operate or produce optimal playback quality. The 
technical criteria set forth in this owner's manual are 
meant only as a guide. Use of CD-RW for MP3 files 
is not recommended.

 

You must obtain any required permission from 
copyright owners to download or use copyrighted 
content. Toshiba cannot and does not grant such 
permission.

 

Supported Formats

 MP3 

tracks

 

-The file extensions has to be 

'

.mp3 

'.

 

 -JPEG/ISO 

format.

 

-Maximum 8 characters display for folder name.

 

-Maximum 15 characters display for file name.

 

-Supported sampling frequencies & corresponding 
bit-rates;

 

 

32kHz,  64-320  kbps  

 

 

44.1kHz, 48kHz  80-320  kbps  

 

JPEG/Pictures

 

-The file extensions has to be 

'

.JPG 

'

 and not 

 

'

.JPEG

.

 -JPEG/ISO 

format.

 

-Maximum of 5760×3840 resolution can be 
supported.

 

-Maximum file size: 10M.

 

-It can only display DCF-standard still pictures or 
JPEG pictures such as TIFF.

 

DivX

®

 

-The file extensions has to be 

'

.AVI 

', '

.MPG 

or

 

'

.MPEG 

'.

 

-

DivX

®  

3.11, 4.x, 5.x and 6.0.

 

-Q-pel accurate motion compensation.

 

Global Motion Compensation (GMC) playback.

 -Official 

DivX

®

 Certified product. 

 

-Plays all versions of DivX

®

 video (including DivX

®

 6) 

with standard playback of DivX

®

 media files.

 

Tips:

 

– Maximum 100 sessions for CD and 10 multi border 
for DVD are supported.

 

– For DVD-R, DVD-RW multi border, only finalized 
disc can be supported.

 

– For DVD+R and DVD+RW multi border, both 
finalized and unfinalized disc cannot be supported.

 

Starting disc playback

A

 

Turn on the TV and select the video input connected 
to the DVD player.

B

 Press 

2

ON / STANDBY to turn on the DVD player.

C

  Press OPEN/CLOSE to open the disc tray.

D

  Place a disc onto the disc tray with the label facing 

up, then press OPEN/CLOSE.

  

For double-sided discs, load the side which you 

want to play

 

facing up.

E

  Playback may start automatically. If not, press PLAY/

PAUSE 

.

  

If a disc menu appears on the TV, see page 14 

 

'Using the disc menu'.

  

If the parental control was activated for the 

 

inserted disc, you have to enter your four-digit 

 password, see page 20.

 

  

For more playback features, see pages 13 - 17.

 Tips:
 

-Do not overturn the DVD player while disc loading, 
playing or ejecting.

 

-Do not close the disc tray manually even if the 
power is switched off.

 

Basic playback control

 

Unless otherwise stated, all operations described are 
based on Remote Control use.

 

Pausing playback

A

  During playback, press PLAY/PAUSE 

 to pause 

playback and display a still picture.

  

Sound will be muted.

B

  To resume normal playback, press PLAY/PAUSE

 

 

 again.

 

Skipping chapter/track

 

 

 Press PREV 

 / NEXT 

 

to go to the previous 

or next chapter/track during playback.

  

When PREV  

 is pressed after the first 5 

seconds of playback, playback will start from the 
beginning of the current chapter/track. If you press 
the button within the first 5 seconds, playback will 
start from the beginning of the preceding chapter/
track.

  

 Press DISPLAY to display the disc 

 

information for title/chapter/track.

  

 Use Number buttons to enter valid chapter / track 

number directly. For the track/chapter numbers which 

Playback from disc/Playback Feature

 Helpful 

hint

:  Some discs cannot be played on this DVD player due to the configuration and characteristics 

 

 

          of the disc, or due to the condition of recording and authorizing software

Summary of Contents for SD-590KY



























Reviews: