57
Parental control setting
Some discs are specified as not suitable for children.
Such discs can be limited not to playback with the unit.
1) Press
C
or
D
to select “Parental”, then press
ENTER.
“Enter Password” screen will appear.
2) Press “0000” using
Number buttons (0–9)
.
(Please note, this is pre-setting password of this
unit). Then press
ENTER
. The parental level list
will appear.
•
Level Off
: The parental control setting does not
function.
•
Level 8
:
Virtually all DVD software can be
played back.
•
Level 1
:
DVD software for adults cannot be
played back.
3) Press
C
or
D
to select from the level 1 to level 8.
The limitation will be more severe as the level
number is lower. Then press
ENTER
.
4) Press
OPEN/CLOSE
to activate Parental control
setting.
Notes:
• Depending on the discs, the unit cannot limit
playback.
• Some discs may not be encoded with specific
rating level information though its disc jacket says
“adult.” For those discs, the age restriction will not
work.
• The password is required every time when you
change the parental level.
• If you input a wrong number, press
CLEAR
.
Set the new password
1) Press
C
or
D
to select “Password”, then press
ENTER
. “Enter Current Password” screen will
appear.
2) Press
Number buttons (0–9)
to input the current
password (If the password has not been set yet
after you purchase this unit, it is “0000”).
3) Then press
ENTER
. “Enter New Password” screen
will appear. Press
Number buttons (0–9)
to input
the new password.
4) Press
ENTER
. Now your new password has been
set. Be sure to remember this number!
Customizing the function settings
QSound
This DVD video player is equipped with “QSound”. It can
produce the effect of being in a cinema or a concert hall.
Off:
The QSound is disengaged.
On:
The QSound operates.
Notes:
• The QSound setting can also be changed with
AUDIO
on the remote control (see page 46).
• This function works only when the disc recorded with
Dolby Digital is played back.
• When this function works, the volume might change.
• When the voice is distorted, turn off QSound.
!"
#$%
&
'&( ) *$ +
$*
&$ $
&$,
$
#
(
*-./
#$%
Setting details
Parental
: Off
Set Password
Output
: Interlace
DivX(R) VOD
Menu
: English
Subtitle
: English
Audio
: English
E.B.L.
: Off
TV Screen
: 4:3
Display
: On
Picture Mode
: Auto
JPEG Interval
: 5 Seconds
Screen Saver
: On
Night Mode
: Off
QSound
: Off
Digital Out
: PCM
Off:
It plays back at the recording level on the
disc.
On:
Loud sound such as explosion is toned
down slightly when played back. This is
suitable when it is connected to a stereo.
Notes:
•
This function works only when the disc recorded with
Dolby Digital is played back.
•
The level of Night Mode may differ depending on DVD
video disc.
Night Mode
Night Mode enables you to control the dynamic range so
as to achieve a suitable sound for your equipment.
Digital Out
You can select the digital output sound format
corresponding to your system connection.
PCM:
Change Dolby Digital to PCM for the output.
Select when connected to a 2 channel digital
stereo amplifier.
Bitstream:
Disc audio bitstream data will be output.
Off:
There is no sound output from DIGITAL AUDIO
OUT jack.
Note:
Even if you select “Bitstream”, MPEG Audio will be
output in PCM format.
2K20301A [EN] P54-58
2/12/07, 4:13 PM
57
