1-33
8. Press
VCR MENU
to set another timer record
event and follow steps 3 to 7.
Check that the timer event details are correct.
Press
VCR MENU
twice.
If
PLEASE CHECK
is displayed, you have
entered incorrectly and will need to re-enter the
data.
Press
I
/
to switch your DVD+VCR to Timer
Standby mode.
The timer symbol (
) will appear in the display
window while your DVD+VCR waits to make the
recording.
9. Press
STOP
(
■
) to end timer recording.
Notes:
•
During timer recording standby mode, the DVD and
VCR mode cannot be operated. To use the
DVD+VCR, press
I
/
. After you use the DVD or
VCR, press
I
/
again to put the VCR into timer
recording standby mode.
•
If at a later date you wish to
delete
or
change
any
of the settings in timer event memory you may do
so without having to enter all the timer event infor-
mation again. Simply display the timer event
screen. Use
v
or
V
to select the event that you
wish to
delete
or
change
.
Press
W
to delete the event...or
Press
ENTER/OK
to change; then press
W
or
w
to
select; Station, Date, Start and End times and LP.
Press
v
or
V
to enter the correct information.
•
If Timer record events Overlap...
Make sure that the preset times of the timer record-
ing events do not overlap. If they do, the earlier pro-
gramme will always be given priority.
Example:
Programme 1 is programmed to start at 16:00 and
end at 17:00.
Programme 2 is programmed to start at 16:30 and
end at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme
2 will be recorded.)
•
To watch a DVD while performing a timer recording,
press
TV/VCR
to select VCR mode. Then press
DVD to view the DVD deck output source on the TV
screen.
•
Video Programme System (VPS)
The Video Programme System (VPS) ensures that
the TV programmes that you have programmed for
timer recording will be recorded exactly from their
beginning to end, even if the actual broadcasting
time differs from the scheduled time due to delayed
start, or if the programme is extended beyond its
scheduled time. Also, if a programme is interrupted,
for example, if a news flash is inserted, the record-
ing will also be interrupted automatically and
resumed when the programme continues.
The VPS signal is broadcast by the TV station and
this controls the timer in the video recorder.
VPS should be set ON for all timer recordings from
TV stations broadcasting these signals. It should be
set OFF for all timer recordings from TV stations
that are not broadcasting these signals.
*** The similar system PDC, which is used in the
time being in the Netherlands, can also be used
with your new video recorder.
