4
Additional Safety Instructions
16. Do not place anything on top of this unit.
17. Do not place the apparatus on amplifiers or equipment that
may produce heat.
18. Never block or cover the slots or openings in the unit. Never
place the unit:
• on a bed, sofa, rug or similar surface;
• too close to drapes, curtains, or walls; or
• in a confined space such as a bookcase, built-in cabinet, or
any other place with poor ventilation.
The slots and openings are provided to protect the unit from
overheating and to help maintain reliable operation.
19. If the apparatus should emit smoke or an unusual odor,
immediately disconnect the power cord from the wall outlet.
Wait until the smoke or smell stops, then ask your dealer for a
check and repair. Neglecting to do so may cause fire.
20. During lighting, do not touch the connecting cables or the
apparatus.
21. Warning: To prevent spread of fire, keep candles or other
open flames away from this product at all times.
USA
Federal Communications Commission Statement
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.
Interference
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Bluetooth
®
Wireless Technology and Your Health
The products with Bluetooth
®
wireless technology, like other
radio devices, emit radio frequency electromagnetic energy.
The level of energy emitted by devices with Bluetooth
®
wireless
technology however is much less than the
electromagnetic energy emitted by wireless devices such as
mobile phones.
Because products with Bluetooth
®
wireless technology operate
within the guidelines found in radio frequency safety standards
and recommendations, TOSHIBA believes Bluetooth
®
wireless
technology is safe for use by consumers.
These standards and recommendations reflect the consensus
of the scientific community and result from deliberations of
panels and committees of scientists
who continually review and interpret the extensive research
literature.
In some situations or environments, the use of Bluetooth
®
wireless technology may be restricted by the proprietor of the
building or responsible representatives of the organization.
These situations may, for example, include in any other
environment where the risk of interference to other devices or
services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of
wireless devices in a specific organization or environment (e.g.
airports), you are encouraged to ask for authorization to use
the device with Bluetooth
®
wireless technology prior to turning
on the equipment.
SB93719S-SW_IB.indd 4
2012/6/19 12:31:58
