manualshive.com logo in svg

Toshiba Satellite U900, Maintenance Manual

Share
Download
Toshiba Satellite U900 Maintenance Manual Download Page 95

3 Tests and Diagnostics 

Satellite U900/U940 /945)Series Maintenance Manual  

10 

3.5 Fan ON/OFF/Speed Test 

The FAN test need the user sense the wind to judge whether the fan is working. And follow the 
below procedures for this test: 

 

The computer will let the fan be “ON” after any key pressed. Feel the wind or 
listen the rotating sound to check whether the fan is working or not. 

NOTE

:  Remember to approach fan outlet that is near left side of unit whether fan is “ON”. 

 

 

The computer will stop the fan working after any key pressed. Feel the wind or 
listen the sound to check if the fan is “OFF”. 

 

The screen should display as below, indicating whether the test is passed or failed after the 
question. 

 

 

After Press “Y”, computer will auto test FAN RPM (2000-6000), and it will 
auto check. 

 

Summary of Contents for Satellite U900






































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands