User’s Manual
1-7
Getting Started
Turning on the power
This section describes how to turn on the power - the
Power
indicator will
then indicate the status. Please refer to the
section in Chapter 6, Power and Power-Up Modes for more information.
1. Open the display panel.
2. Press and hold the computer's power button for two or three seconds.
Figure 1-5 Turning on the power
Starting up for the first time
The Windows 7 Startup Screen will be the first screen displayed when you
turn on the power. Follow the on-screen instructions on each screen in
order to properly install the operating system.
■
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Please refer to the section
■
Volume cannot be adjusted during Windows Setup.
1. Power button
1
When it is displayed, be sure to read the
Software License Terms
carefully.
