Toshiba Satellite Pro C640 User Manual Download

Page: 131 / 169

User’s Manual

8-8

Troubleshooting

External Monitor

Refer also to Chapter 3,

Hardware, Utilities and Options

and to your

monitor’s documentation.

Memory cards: Secure Digital (SD)/Secure Digital High Capacity
(SDHC)/Secure Digital Extended Capacity (SDXC)/MultiMediaCard
(MMC)

Refer also to Chapter 3,

Hardware, Utilities and Options

Cannot write correctly

If you have trouble writing, make sure you are

observing the following precautions:

■

Use only media recommended by TOSHIBA

■

Do not use the mouse or keyboard during

writing.

■

Use only the software supplied with the

computer for recording.

■

Do not run or start other software during

writing.

■

Do not jar the computer during writing.

■

Do not connect/disconnect external devices

or install/remove internal cards during writing.

If problems persist, contact your dealer.

Problem

Procedure

Problem

Procedure

Monitor does not turn

Make sure that the external monitor’s power

switch is on. Confirm that the external monitor’s

power cable is plugged into a working power

outlet.

No display

Try adjusting the contrast and brightness

controls on the external monitor.
Press hot keys

to change the display

priority and make sure it is not set for the internal

display.

Display error occurs

Check that the cable connecting the external

monitor to the computer is attached firmly.

If problems persist, contact your dealer.

Problem

Procedure

Memory card error

occurs

Reseat the memory card to make sure it is firmly

connected.
Check the card’s documentation.

Summary of Contents for Satellite Pro C640










































































































































































Search results

Summary of Contents for Satellite Pro C640

Reviews:

Related manuals for Satellite Pro C640

Brands by name

Popular brands

Toshiba Satellite Pro C640, User Manual

Search results

Summary of Contents for Satellite Pro C640

Reviews:

Related manuals for Satellite Pro C640

Brands by name

Popular brands