User’s Manual
6-2
Satellite C600/C640/C645/C600D/C640D/C645D, Satellite Pro C600/C640/C600D/C640D
Table 6-1 Power conditions continued
Monitoring of power condition
As shown in the below table, the
DC IN/Battery
and
Power
indicators on
the system indicator panel alert you to the computer’s operating capability
and battery charge status.
DC IN/Battery indicator
Check the
DC IN/Battery
indicator to determine the status of the battery
pack. The following indicator lights indicate the battery status:
Power on
Power off
(no operation)
AC
adaptor
not
connected
Remaining battery
capacity is above
low battery trigger
point
• Operates
•
DC IN/Battery
LED:
amber
Remaining battery
capacity is below low
battery trigger point
• Operates
•
DC IN/Battery
LED:
blink amber
Remaining battery
capacity is
exhausted
Computer shuts down
No battery installed
•
No operation
•
DC IN/Battery
LED: off
Blinking amber
The battery charge is low, the AC adaptor must be
connected in order to recharge the battery.
Or, Indicates a problem with the power supply. You
should initially try plugging the AC adaptor into
another power outlet - if it still does not operate
properly, you should contact your reseller or dealer.
Amber
Indicates the AC adaptor is connected and the
battery is charging.
Green
Indicates the AC adaptor is connected and the
battery is fully charged. Or, Indicates the AC adaptor
is connected and there is no battery pack installed.
No light
Under any other conditions, the indicator does not
light.
