manualshive.com logo in svg

Toshiba Satellite Pro A500 series, Service Manual

Share
Download
Toshiba Satellite Pro A500 series Service Manual Download Page 124

3.8 Video 

3  Diagnostic Programs 

3.8  Video 

This test item tests the video by: 

1.

 

displaying the figures in different graphic modes. 

2.

 

displaying the property and color of the characters in different text modes.  

 
User will confirm whether each video mode works normally by judging whether the display 
is correct. It checks whether the video memory works normally by writing data into the video 
memory, then reading it out and comparing the two value. 

Subtest 01 

 Text Mode 

1.

 

Character Test 

Tests two types of font patterns.  

Font 9*14 

Font 9*16 

It requires the user to check whether all characters of each font type displayed 
correctly by answering the questions prompted on screen. It will be displayed as 
follows:. 

 

2.

 

Text Attribute 

This test item is to check whether the text attribute of normal, hi-intensity, 
inverse, and blinking in VGA text mode could be correctly displayed on the 
screen. 

Satellite A500 Maintenance Manual 

51 

Summary of Contents for Satellite Pro A500 series






























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands