Toshiba Satellite Pro 6100 Series Quick Start Manual Download

Page: 6 / 12

FIELD REPLACEABLE UNIT DOCUMENTATION

6100 Series

TOSHIBA

Tough Enough for Today’s World.

5. Remove

two M3x4 brass flat head screws

securing

the HDD to the bracket and remove the HDDbracket.

M3x4 brass flat head screws

HDD bracket

HDD

HDD REMOVAL

KEYBOARD REMOVAL

1. Turn the computer right side up and open the display
panel.
2. Using the

case separator,

unlatch the

keyboard

holder

at the top of the

keyboard

Latch

Keyboard holder

Keyboard

3. Remove

two

M2.5x2.6 black screws

securing the

keyboard.

M2.5x2.6 black screws

KEYBOARD REMOVAL

4. Lift out the

keyboard

and set it as shown above.

5. Disconnect the

keyboard cable

from

PJ123

on the

system board.

Satellite Pro

Keyboard

Keyboard
cable

PJ123

Summary of Contents for Satellite Pro 6100 Series













Search results

Summary of Contents for Satellite Pro 6100 Series

Reviews:

Related manuals for Satellite Pro 6100 Series

Brands by name

Popular brands

Toshiba Satellite Pro 6100 Series, Quick Start Manual

Search results

Summary of Contents for Satellite Pro 6100 Series

Reviews:

Related manuals for Satellite Pro 6100 Series

Brands by name

Popular brands