background image

Memory Kit

2 GB, 4GB or 8GB memory modules
(DDR3-1333/1600) can easily be installed in the
computer.
The available option memory depends on
TOSHIBA authorization.

Universal AC Adaptor

If you frequently use your computer at more than
one site, it may be convenient to purchase an
additional AC adaptor to be kept at each site in
order to remove the need to always carry the
adaptor with you.

Battery pack

An additional battery pack can be purchased for
use as either a spare or replacement. Please
refer to Chapter 5, 

Power and Power-up Modes

for further information.

Sound System

This section describes some of the audio control functions.

Volume Mixer

The Volume Mixer utility lets you control the audio volume for playback of
devices and applications under Windows.

To launch the Volume Mixer utility, right click on the speaker icon on
the Taskbar, and select 

Open Volume Mixer

 from the sub menu.

To adjust the volume level of speakers or headphones, move the

Speakers

 slider.

To adjust the volume level of an application that you are using, move
the slider for the corresponding application.

Microphone Level

Follow the steps below to change the microphone recording level.
1.

Right click on the speaker icon on the Taskbar, and select 

Recording 

devices

 from the sub menu.

2.

Select 

Microphone

, and click 

Properties

.

3.

On the 

Levels

 tab move the 

Microphone

 slider to increase or

decrease the microphone volume level.

If you feel the microphone volume level is inadequate, move the

Microphone Boost

 slider to a higher level.

Audio Enhancements

In order to apply the sound effects for your current speaker, follow the
steps below.

User's Manual

3-47

Summary of Contents for Satellite P845






























































































































































Reviews: