Toshiba Satellite P50W-B Series User Manual Download

Page: 46 / 123

Please note that the computer case temperature may rise when Intel

Smart Connect Technology is enabled.

Power Condition Descriptions

Power conditions

The computer's operating capability and battery charge status are affected
by different power conditions, including whether an AC adaptor is
connected and what the charge level is for that battery.

The LED in the table below refers to the DC IN/Battery indicator.

Power on

Power off
(no operation)

AC adaptor
connected

Battery fully
charged

• Operates
• No charge
• LED: white

• No charge
• LED: white

Battery partially
charged or no
charge

• Operates
• Charge
• LED: amber

• Quick charge
• LED: amber

AC adaptor
not
connected

Remaining
battery capacity
is above low
battery trigger
point

• Operates
• LED: off

Remaining
battery capacity
is below low
battery trigger
point

• Operates
• LED: flashes
amber

Remaining
battery capacity
is exhausted

Computer shuts
down

DC IN/Battery indicator

Check the

DC IN/Battery

indicator to determine the status of the battery

pack and the power status with the AC adaptor connected. The following
indicator conditions should be noted:

User's Manual

3-12

Summary of Contents for Satellite P50W-B Series




























































































































Search results

Summary of Contents for Satellite P50W-B Series

Reviews:

Related manuals for Satellite P50W-B Series

Brands by name

Popular brands

Toshiba Satellite P50W-B Series, User Manual

Search results

Summary of Contents for Satellite P50W-B Series

Reviews:

Related manuals for Satellite P50W-B Series

Brands by name

Popular brands