manualshive.com logo in svg

Toshiba Satellite P30, User Manual

Share
Download
Toshiba Satellite P30 User Manual Download Page 140

140

Exploring Your Options

Exploring audio features

 

 

 

 

 

5.375 x 8.375 ver 2.3

Exploring audio features

You can use your computer to record sounds using an 
external microphone. You can play .wav sound files or audio 
CDs using the built-in speakers, headphones, or external 
speakers.

SRS TruSurround XT may ship with your computer.

SRS TruSurround XT is available only when using WinDVD 
applications. 

Recording sounds

You may record sounds as .wav files by connecting an 
external microphone or other sound source to the microphone 
jack. 

DEFINITION: A .wav (pronounced “wave”) file is a Windows

®

 

format for storing sound.

TECHNICAL NOTE: If you record MP3 files, you will only be 
able to play them on a device capable of playing MP3 files.

NOTE

Summary of Contents for Satellite P30







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands