manualshive.com logo in svg

Toshiba Satellite P100 Series, Maintenance Manual, Page: 64 / 314

Share
Download
Toshiba Satellite P100 Series Maintenance Manual Download Page 64

 2 

Troubleshooting 

Procedures 

6 

 

Satellite P100 Maintenance Manual(960-Q02) 

If the diagnostics program cannot detect an error, the problem may be intermittent. The Test 
program should be executed several times to isolate the problem. Check the Log Utilities 
function to confirm which diagnostic test detected an error(s), and then perform the 
appropriate troubleshooting procedures as follows:  

1.

 

If an error is detected on the system test, memory test, display test, CD-ROM/DVD-
ROM test, expansion test, real timer test, sound test or Modem/LAN/Bluetooth 
/IEEE1394 test, perform the System Board Troubleshooting Procedures in Section 2.4. 

2.

 

If an error is detected on the floppy disk test, perform the USB FDD Troubleshooting 
Procedures in Section 2.5. 

3.

 

If an error is detected on the hard disk test, perform the HDD Troubleshooting 
Procedures in Section 2.6. 

4.

 

If an error is found on the keyboard test (DIAGNOSTICS TEST) and pressed key 
display test (ONLY ONE TEST), perform the Keyboard Troubleshooting Procedures 
in Section 2.7. 

5.

 

If an error is found on the touch pad test (ONLY ONE TEST), perform the touch pad 
Troubleshooting Procedures in Section 2.8. 

6.

 

If an error is detected on the display test, perform the Display Troubleshooting 
Procedures in Section 2.9. 

7.

 

If an error is detected on the CD-ROM/DVD-ROM test, perform the Optical Disk 
Drive Troubleshooting Procedures in Section 2.10. 

8.

 

If an error is detected on the modem test, perform the Modem Troubleshooting 
Procedures in Section 2.11. 

9.

 

If an error is detected on the LAN test, perform the LAN Troubleshooting Procedures 
in Section 2.12. 

10.

 

If an error is detected on the wireless LAN test, perform the Wireless LAN 
Troubleshooting Procedures in Section 2.13. 

11.

 

If an error is detected on the sound test, perform the Sound Troubleshooting 
Procedures in Section 2.14. 

12.

 

If an error is detected on the VGA daughter card test, perform the VGA 
Troubleshooting Procedures in Section 2.15. 

13.

 

If an error is detected on the fingerprint test, perform the fingerprint Troubleshooting 
Procedures in Section 2.16. 

14.

 

If an error is detected on the Bluetooth test, perform the Bluetooth Troubleshooting 
Procedures in Section 2.17. 

Summary of Contents for Satellite P100 Series



























































































































































































































































































































Reviews:

No comments