Toshiba Satellite M100 Series User Manual Download Page 51

Page: 51 / 283

Getting Started

Using the computer for the first time

5.375 x 8.375 ver 2.3

Using the computer for the first time

The computer is now ready for you to turn it on and begin
using it.

Opening the display panel

Facing the front of the computer, locate the latch on the
center of the display panel.

Slide the display latch and raise the display panel.

Sample opening the display panel

Adjust the display to a comfortable viewing angle.

To avoid damaging the display panel, do not force it beyond
the point where it moves easily, and never lift the computer by
the display panel.

Summary of Contents for Satellite M100 Series




























































































































































































































































































Search results

Summary of Contents for Satellite M100 Series

Reviews:

Brands by name

Popular brands

Toshiba Satellite M100 Series, User Manual

Search results

Summary of Contents for Satellite M100 Series

Reviews:

Brands by name

Popular brands