Toshiba Satellite L600D Maintenance Manual Download Page 197

Page: 197 / 283

Chapter 4 Replacement Procedures

4.9 Top Cover Assembly

Removing the Top cover assembly

The following describes the procedure for removing the Top cover assembly (See Figure 4-9-
1 to 4-9-5).

Turn over the computer and open the door.

Remove memory slot cover. (See Figure 4-4-1).

3. Remove the screws of the ODD and ODD Bezel. (See Figure 4-8-1)

4. Remove the following

screws

securing the Top cover assembly from the back and

bottom of computer.



M2-0.4



2 FLAT BIND screw Back x3



M2.0



3 FLAT BIND screw Back x3



M2.0



5.0

FLAT BIND screw Back

x11

Figure 4-9-1 Remove the screws (back)

Satellite L640/L645, Satellite Pro L640/Pro L645 Maintenance Manual (960-Q08)

4-33

Summary of Contents for Satellite L600D




























































































































































































































































































Search results

Summary of Contents for Satellite L600D

Reviews:

Brands by name

Popular brands

Toshiba Satellite L600D, Maintenance Manual

Search results

Summary of Contents for Satellite L600D

Reviews:

Brands by name

Popular brands