Toshiba Satellite L510 Series User Manual Download Page 54

Page: 54 / 235

Getting Started

Adding memory (optional)

If the computer is on, begin at step

; otherwise, skip to step

Click Start, and then click the arrow next to the lock button in
the lower-right corner of the Start menu.

The Shut Down menu appears.

(Sample Image) Shut Down menu

Click Shut Down.

The operating system turns off the computer.

Unplug and remove any cables connected to the computer,
including the AC adaptor.

Close the display panel and turn the computer upside down.

Remove the main battery. For information on removing the
main battery, see

“Removing the battery from the computer”

on page 121

(Sample Illustration) Locating the memory module slot cover

Arrow

Shut Down Menu

Start

Memory module slot cover

Front of computer

Summary of Contents for Satellite L510 Series












































































































































































































































Search results

Summary of Contents for Satellite L510 Series

Reviews:

Related manuals for Satellite L510 Series

Brands by name

Popular brands

Toshiba Satellite L510 Series, User Manual

Search results

Summary of Contents for Satellite L510 Series

Reviews:

Related manuals for Satellite L510 Series

Brands by name

Popular brands