manualshive.com logo in svg

Toshiba Satellite A130, Maintenance Manual

Share
Download
Toshiba Satellite A130 Maintenance Manual Download Page 2

 

ii                                                                     

 

[CONFIDENTIAL]

 Satellite A130/ A135 Series Maintenance 

Manual 

 

 

 

 

 

 

 

Copyright 

© 2006 by Toshiba Corporation. All rights reserved.  Under the copyright laws, this manual 
cannot be reproduced in any form without the prior written permission of Toshiba.  No patent 
liability is assumed with respect to the use of the information contained herein. 

Toshiba Personal Computer Satellite A130/ A135 Maintenance Manual 

First edition Dec. 2006 

Disclaimer 

The information presented in this manual has been reviewed and validated for accuracy.  The 
included set of instructions and descriptions are accurate for the M100 Series at the time of this 
manual's production.  However, succeeding computers and manuals are subject to change 
without notice.  Therefore, Toshiba assumes no liability for damages incurred directly or 
indirectly from errors, omissions, or discrepancies between any succeeding product and this 
manual. 

Trademarks 

IBM is a registered trademark, and OS/2 and PS/2 are trademarks of IBM Corporation. 
Microsoft, MS-DOS, Windows, DirectSound and DirectMusic are registered trademarks of 
Microsoft Corporation. 
Intel and Pentium are registered trademarks, and SpeedStep is a trademark of Intel Corporation. 
Sound Blaster is a registered trademark of Creative Technology Ltd. 
Centronics is a registered trademark of Centronics Data Computer Corporation. 
Photo CD is a trademark of Eastman Kodak. 
All other properties are trademarks or registered trademarks of their respective holders. 

Summary of Contents for Satellite A130



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands