Toshiba Satellite 2410 Series User Manual Download Page 33

Page: 33 / 257

Finding Your Way Around

Front with the display open

5.375 x 8.375 ver 2.4.0

The

Toshiba Scroller

, located

between the primary and

secondary control buttons, allows you to scroll pages
vertically on your display.

The

secondary

control button

, located below the TouchPad,

acts like the secondary button on a mouse.

The

CD/DVD control buttons

allow you to play audio CDs

when the computer is turned off. You can also use them to
play CDs and DVDs with the computer turned on. For a
description of these controls, see

“CD/DVD control buttons”

on page 36

The front panel provides a

palm rest

to assist you in

maintaining proper posture while using the computer.

The

TouchPad

enables you to move the cursor with the

stroke of a finger. For more information, see

“Using the

TouchPad” on page 63

The 85-key

keyboard

provides all the functionality of a full-

size keyboard. For more information, see

“Using the

keyboard” on page 73

The

keyboard indicator lights

provide information about

various keyboard functions. For details, see

“Keyboard

indicator lights” on page 34

The

TOSHIBA Console button

allows quick access to

various functions. See

“TOSHIBA Console” on page 185

The computer’s

screen

is a liquid crystal display (LCD) that

provides clear, sharp images. For more information on your
viewing options, see

“Display modes” on page 228

Summary of Contents for Satellite 2410 Series


































































































































































































































































Search results

Summary of Contents for Satellite 2410 Series

Reviews:

Related manuals for Satellite 2410 Series

Brands by name

Popular brands

Toshiba Satellite 2410 Series, User Manual

Search results

Summary of Contents for Satellite 2410 Series

Reviews:

Related manuals for Satellite 2410 Series

Brands by name

Popular brands