19
SETTING UP YOUR TV
Engl
ish
With the exception of
DTV Scan Type
and
DTV Modulation
items, all of the following items will have 2 operating modes.
The first is
Auto
where the values for each item are preset by
the system. The second is an
Input
mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the
Input
state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
Operator Selection:
You can choose the Cable operator depending on the
Country
you set.
DTV Scan Type:
This item determines whether a
Quick Scan
or a
Full Scan
will
be executed.
The
Quick Scan
is a simplified version of the
Full Scan
that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
grayed out when DTV Scan Type is set to “Full Scan”.
NOTE:
As new services are broadcast, it will be necessary to
re-tune the television in order to view them.
Auto Tuning
will completely re-tune the television and can be
used to update the channel list.
It is recommended that Auto
Tuning is run periodically to ensure that all new services are
added
. All current channels and settings, i.e. locked channels,
will be lost.
a
Press
MENU
/
C
c
to highlight
Setup
icon.
b
Press
B
/
C
c
to highlight
System Setup
icon and
press
OK
.
c
Press
B
or
b
to select
Auto Tuning
and press
OK
.
d
Press
C
or
c
to select
Yes
and press
OK
.
Press
C
or
c
to select
DTV and ATV
,
DTV
or
ATV
, if
available, then highlight
Start Scan
and press
OK
to
continue with the
Auto Tuning
.
NOTE:
If you have selected “
Others
” for the
Country
field in the
System Setup
menu, and selected a
tuning mode other than “
DTV
” , choose the optimum
ATV broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV
and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the
Auto Tuning
screen
will display the services found.
e
Press
B
or
b
to move through the list to select a
channel and press
OK
to view.
Auto Tuning
System Setup
Menu Language
English
Country
Ant/Cable
ATV Manual Tuning
DTV Manual Tuning
Quick Setup
DTV Settings
Auto Tuning
Germany
Auto Tuning - Antenna
DTV and ATV
Tuning Mode
Start Scan
