RemotEye III Quick Installation Guide – 63761-002
3
Toshiba RemotEye III Configuration
Main Menu
→
(1) Toshiba RemotEye III Configuration (see Figure 4: Console Configuration
+==================================================================+
| [ TIC RemotEye III Configuration Menu ] |
+==================================================================+
1. System Group
2. Control Group
3. Parameter Group
4. Email Group
5. EMD Group
0. Return to previous menu
Please Enter Your Choice =>
Figure 4: Console Configuration Menu Description
System Group
Main Menu
→
(1)Toshiba RemotEye III Configuration
→
(1) System Group (see Figure 5:
Console System Group Menu Description).
The System Group provides access to the system settings listed below. The settings may be
viewed or changed from this screen. When using the Dynamic Host Configuration Protocol
(DHCP), items 1 – 3 will be retrieved automatically.
+====================================================================+
| [ System Group Menu ] |
+====================================================================+
RemotEye III Agent Version : TIC RemotEye III v1.00
Ethernet address : 00 E0 D8 08 80 0D
1. Ip Address : 172.18.1.63
2. Gateway Address : 172.18.1.1
3. Network Mask : 255.255.240.0
4. Date and Time
0. Return to previous menu
Please Enter Your Choice =>
Figure 5: Console System Group Menu Description
Making the Network Connection
Each Ethernet network is different. Therefore, the following steps should be used as an outline
for connecting the RemotEye III to a network:
1.
Connect one end of a Category 5 cable to the NETWORK RJ45 receptacle of
RemotEye III.
2.
Connect the other end of the Category 5 cable to a designated network switch or hub. A
network administrator will allocate an available port.
3.
Verify a network link has been established. Confirm the leftmost green LED is
illuminated
