Service Mode
Self Diagnostic Function
1. Press "9" button on Remote Control during display of adjustment menu in Service Mode.
The diagnosis will begin to check if interface among IC's is executed properly.
2. During diagnosis, the following displays are shown.
ADJUSTMENT
Explanation
Data Format
1 Version information of TV-MICRO
Display 1 byte data.
2 Version information of TV-MICRO EEPROM
Display 1 byte data.
3 Total brightness hour of TV
Display 4 bytes data.
4 V-MICRO System status
not used.
5 IIC-BUS status
None is normal.
"SCL-GN" (Red indication)
SCL-GND short circuit
"SDA-GND" (Red indication)
SDA-GND short circuit
