34
EN
5
Select the digital (DVB) / analogue (ATV) mode
or external input (AV1/AV2/AV3) using [
K
\
L
],
then press [
B
].
6
Select the channel number to record using
[
K
\
L
], then press [
B
].
7
Select the recording media (“HDD” or “DVD”)
using [
K
\
L
], then press [
B
].
8
Select the recording mode using [
K
\
L
], then
press [
B
].
Refer to “Recording Mode” on page 28.
Select “STTL” to “ON” or “OFF” using [
K
\
L
].
If you set “STTL” to “ON”, subtitle will be recorded too.
• When analogue channel is selected, “PDC” will be
displayed instead of “STTL”.
Select “PDC” to “ON” or “OFF” using [
K
\
L
].
Refer to “PDC (Programme Delivery Control)” on this
page.
• When DVB channel is selected, “STTL” will be displayed
instead of “PDC”.
• PDC system is only available for HDD.
• PDC system is not available for “Daily” and “M-F” timer
programme.
10
Press [ENTER
\
OK] when all information
required is entered.
Your programme setting is stored.
• To set another programme, repeat steps
2
to
10
.
• To exit, press
[TIMER PROG.]
.
• When 2 or more programmes are overlapped, “Timer
programme overlapped” appears, and the overlapped
programme will be displayed in blue. To correct the timer
programme, refer to “Checking, Cancelling or Correcting
the Timer Programming Information” on this page.
The
icon will appear on the front panel display.
Note
• If you have not set the clock, the clock setting window will
appear instead of the Timer Programming list. Continue
from “Clock Setting” on page 70 before programming the
timer.
• Press
[
K
\
L
]
to move the cursor in “Timer Programming”
list.
• If you have a timer programme with PDC function, and if you
are watching different channel from the timer programme,
confirmation message to change the channel will appear 15
minutes before the programme starts (the message will also
re-appear 30 seconds before the programme starts). The
channel will automatically be changed to the programmed
channel 15 seconds before the programme starts.
Alternate recording (DVD only)...
If there is no recordable disc in the unit, if the disc does not
have enough space to complete the recording, or if the
material is “copy-once” programme and prohibited to be
recorded on a DVD in the unit, the unit will detect it and
automatically record to the HDD even when DVD is selected
as the recording media. If the available space on the HDD is
less than that of DVD, the unit will not perform the alternate
recording. This feature is available only for timer recording.
Not available for one-touch timer recording.
The Programme Delivery Control (PDC) assures that the TV
programmes you have programmed for timer recording are
recorded exactly from beginning to end, even if the actual
broadcasting time differs from the scheduled time due to a
delayed start or extension of the programme duration.
Furthermore, if a programme is interrupted, the recording will
also be interrupted automatically and resumed when the
programme starts again.
If the PDC signal drops out because the broadcast signal is
weak, or if a broadcasting station does not transmit a regular
PDC signal, the timer recording is performed in normal mode
(without PDC) even if it was programmed for PDC. If the
starting time of the PDC timer recording is between 0:00 and
3:59 on a given day, the PDC function will operate from 20:00
on the previous day to 4:00 on the next day. If the starting time
of the PDC timer recording is between 4:00 and 23:59 on a
given day, the PDC function will operate from 0:00 on the
given day to 4:00 on the next day. This means that if the
relevant programme is broadcasted within this period, it is
recorded correctly. If the timer is not programmed correctly,
the incorrect timer setting stays in effect unless you cancel it.
To cancel an incorrect timer setting, refer to “Checking,
Cancelling or Correcting the Timer Programming Information”
on this page.
Note
• This feature is only available for analogue channels.
• If DVB channels have been stored in this unit, you cannot
select PDC on.
1
Press [TIMER PROG.].
2
A) To delete the timer programme:
1) Select the programme you want to delete using
[
K
\
L
]
, then press
[ENTER
\
OK]
.
2) Select “Delete” using
[
K
\
L
]
, then press
[ENTER
\
OK]
.
Confirmation window will appear.
3) Select “Yes” using
[
K
\
L
]
, then press
[ENTER
\
OK]
.
B) To correct the timer programme:
1) Select the programme you want to correct using
[
K
\
L
]
, then press
[ENTER
\
OK]
.
2) Select “Programme Change” using
[
K
\
L
]
, then press
[ENTER
\
OK]
.
3) Correct the timer programme by using
[
K
\
L
\
{
\
B
]
,
then press
[ENTER
\
OK]
.
3
Press [TIMER PROG.] to exit.
To check the timer programming in progress
Press [TIMER PROG.].
Note
• For EPG timer recording, you can only correct the “REC To”,
“Mode” and “STTL”.
9
For DVB channel recording:
For analogue channel recording:
1/1
03/12
0:00
06/12
07/12
07/12
7:00
9:00
17:00
9:00
9:30
18:00
DVB 18
DVB 190
1 BBC1
Timer Programming
Date
Start
End
CH
New Programme
STTL
PDC
THU
PDC (Programme Delivery Control)
Checking, Cancelling or Correcting the
Timer Programming Information
E2TC2BD_EN.book Page 34 Thursday, May 7, 2009 9:02 AM
