Toshiba RD-XS54, Owner'S Manual, Page: 191 / 199

191
Other
s
Function setup
Librar
y
Editing
Pla
ybac
k
Recording
Intr
oduction
Netw
ork Na
vi
Recording
Cannot be recorded on a DVD-RAM disc.
• The disc is protected from deleting data.
→
Set the write-protect tab to the opposite of
“PROTECT” (
page 8).
• The disc is protected by a PC or the recorder.
→
Disable the protection on the device which
protected the disc.
• The disc space is not sufficient.
→
Delete unwanted data ( page 55) or prepare a
new disc.
• The disc is not initialized.
→
Initialize the disc ( page 34).
• The disc may contain errors.
→
Complete the physical format on the disc
(
page 35).
• The physical format on the disc is not completed.
→
Complete the physical format on the disc
(
page 35).
Cannot be recorded on the HDD.
• The DVD mode is selected.
→
Press HDD button.
• The disc space of the HDD is not sufficient.
→
Delete unwanted data ( page 55) or move the
contents to DVD-RAM discs ( page 100).
• Some causes such as power failure may set the
recorder to reject the operation to protect the HDD.
→
Copy necessary contents recorded in the HDD to
a DVD-RAM disc, and initialize the HDD.
TV Guide On Screen
TV program list does not appear when TV Guide
is pressed.
→
Leave the recorder turned off overnight.
→
Check the connection and setup TV Guide On
Screen
®
again.
→
Listings are not provided for satellite services.
• If you are using a cable box:
→
Ensure the G-LINK cable is connected and its IR
transmitter (the G-LINK wand) is placed correctly
in front of the cable box. See
page 25,
“INSTALLATION GUIDE”.
→
Leave the cable box turned on all of the time and
turn off the recorder when not in use or overnight.
→
Consult your service provider for more information.
Remote control
The remote control does not work.
• The batteries in the remote control are exhausted.
→
Replace all the batteries in the remote control
(
page 18, “INSTALLATION GUIDE”).
• The light emitter of the remote control is not pointed
at the receptor of this recorder.
→
Point the emitter of the remote control at the
receptor of this recorder.
• The receptor of this recorder is located too far away
from the remote control.
→
Operate the remote control within 7 meters (23 ft)
from the receptor of this recorder.
• There are obstacles between the remote control and
this recorder.
→
Remove any obstacles.
• The receptor is disturbed by sunlight or fluorescent
light.
→
Change the place of this recorder or shield the
light.
• The remote mode is not appropriate.
→
Adjust the remote mode of the remote control and
this recorder (
page 48, “INSTALLATION
GUIDE”).
Clock
The clock blinks.
→
Set the clock ( page 187).
RD-XS54SU/SC_Ope_E_p189-199 05.7.13, 2:40 AM 191