Toshiba RD-XS30SB, Service Manual

Page: 53 / 54

Power requirement during operation
Power requirement at standby
Power supply
Mass
External dimension
Incoming channels
Antenna input/output terminal
Demodulation input/output terminal
Bit stream input/output terminal
Signal system
Laser
Format
Image recording system
Sound recording system
Disc for recording images
Internal HDD capacity
Tuner
Image input
Image output
S Image input
S Image output
Sound input
Sound output
Sound output (BITSTREAM/PCM optical terminal)
Sound output (BITSTREAM/PCM coaxial terminal)
Remote control
Operating conditions
Clock display
Clock accuracy
40W
3.7W or below (Eco mode: off)
2.3W or below (Eco mode: on)
230-240V AC, 50/60 Hz
5.4kg
Width 430 x Height 78 x Depth 350mm
TV : 2-69CH, CATV : 1-125CH
VHF/UHF : 75
9
, F Connector
0.67Vp-p (75
9
) Unbalanced, Pin jack
0.5Vp-p (75
9
) Unbalanced, Pin jack
Standard PAL Colour TV system
Semiconductor laser, Wavelength : 650nm/780nm
DVD video recording format
DVD video format
MPEG2
Dolby digital, Linear PCM
DVD-RAM disc (4.7GB for one side, 9.4GB for both sides)
DVD-R disc (4.7GB for one side)
60GB
System : Frequency synthesizer
Channel coverage : PAL I VHF : A-J, 11, 13, E2-E12
UHF : E21-E69
CATV : X, Y, Z, S1-S41, 1-53
(48MHz to 464MHz, 8MHz steps)
Stereo : NICAM-I
1.0Vp-p (75
9
), Synchronization negative, Pin jack x 2 systems, 1 at rear, 1 in front SCART socket x 1
at rear
1.0Vp-p (75
9
), Synchronization negative, Pin jack x 2 systems, 1 at rear SCART socket x 1 at rear
(Y) 1.0Vp-p (75
9
), Synchronization negative, Mini DIN4 Pin x 3 systems
(C) 0.286Vp-p (75
9
), 1 at rear, 1 in front SCART socket x 1 at rear
(Y) 1.0Vp-p (75
9
), Synchronization negative, Mini DIN4 Pin x 2 systems
(C) 0.286Vp-p (75
9
), 1 at rear SCART socket x 1 at rear
2.0V (rms), 50k
9
or below, pin jack (L, R) x 3 systems
1 at rear, 1 in front
SCART socket x 1 at rear
2.0V (rms), 200
9
or above, pin jack (L, R) x 2 systems
1 at rear
SCART socket x 1 at rear
Optical connector x 1 system
0.5Vp-p (75
9
), pin jack x 1 system
Wireless remote control (SE-R0082)
Temperature : 5°C–35°C, Position: Horizontal
24 hour digital display
Quartz (monthly deviation : approximately ±30 seconds)
SPECIFICATIONS
Supplied Accessories
Remote control ............................................................................. 1
Batteries (R03) ............................................................................. 2
Power cord ................................................................................... 1
Coaxial cable ................................................................................ 1
Video cable ................................................................................... 1
Audio cable .................................................................................. 1
SCART cable ................................................................................ 1
• The design and specifications may change without prior notice.
• The Illustrations and screens described in this manual may be exaggerated or simplified for easy recognition and may be slightly different from the actual unit.