Toshiba RD-97DTKB, Service Manual

Page: 17 / 75

1-7-1 E2J70INT
HOW TO SELF-CHECK AND INITIALIZE THE HDD & DVD VIDEO
RECORDER
1. Turn on the HDD & DVD Video Recorder.
2. To put the HDD & DVD Video Recorder into the HDD mode, press [HDD] on the remote control unit.
3. To put the HDD & DVD Video Recorder into the self-check mode, after pressing [VARIABLE SKIP] button,
press the [0], [7], and [9] buttons on the remote control unit in that order within three seconds.
Fig. a appears on the screen and all LEDs light.
Fig. a: Self-Check Mode Screen
4. Upon the self-check completion, Fig. b appears on the screen.
Fig. b: Screen of Finishing Self-Check Mode
Table 1: Description of Fig. a
INDICATION DESCRIPTION
DVD CONNECT STATUS (*1) Connecting Condition of DVD(F/E)
HDD CONNECT STATUS (*2) Connecting Condition of HDD
HDD POWER ON HOURS (*3)
Value of HDD power on hours obtained from S.M.A.R.T. command. (If not obtainable,
value of HDD power on hours is “0”.)
Value in parentheses is the factory setting value. (If no setting, the value is “0”.)
SELF CHECK
DVD CONNECT STATUS : --
HDD CONNECT STATUS : --
HDD POWER ON HOURS :
POWER OFF : POWER
*1
*2
*3
*4
*5
*6
*7
SELF CHECK
DVD CONNECT STATUS : OK
HDD CONNECT STATUS : OK
HDD POWER ON HOURS : 120
POWER OFF : POWER
HDD FORMAT : ENTER