background image

– 5 –

15

COMFORT SLEEP button

Push this button to start the OFF timer operation that 
automatically adjusts the room temperature and the 
fan speed.
You can select the OFF timer time from four 
durations (1, 3, 5 or 9 hours).

16

QUIET button

Push this button to start quiet operation.
Pushing this button again will restore normal 
operation.

The degree celsius (

°

C) display

The temperature display can be changed to the degree 
celsius (°C) display as required.

1. Press 

 (°C/°F) button while pressing 

 

with a pen tip or the like.

2. The temperature display is changed to the 

degree celsius (°C) display.

Names and functions of 
indications on wireless remote 
controller

Display

All indications, except for clock time indication, are 
indicated by pushing the START/STOP 

 button.

• In the illustration, all indications are indicated for 

explanation.
During operation, only the relevant indications will be 
indicated on the remote controller.

1

Transmission mark

This transmission mark (

) indicates when the 

remote controller transmits signals to the indoor unit.

2

Mode display

Indicates the current operation mode.
(A : Auto changeover control, 

 : Cool, 

 : Dry, 

 

: Heat, 

 : Fan only)

3

Temperature display

Indicates the temperature setting (62 °F to 86 °F).
When you set the operating mode to 

 : Fan only, 

no temperature setting is indicated.

4

FAN speed display

Indicates the selected fan speed. AUTO or one of 
five fan speed levels (LOW

, LOW

+

MED

, MED

+

, HIGH

can be indicated.
Indicates 

 when the operating mode is 

 : 

Dry.

5

TIMER and clock time display

The time set for timer operation or clock time is 
indicated.
The present time is always indicated except for 
TIMER operation.

6

Hi POWER display

Indicates when the high power operation starts.
Push the Hi-POWER button to start and push it 
again to stop the operation.

7

 (PRESET) display

Indicated when memorizing the preferred operation 
mode or when it has been memorized.
Also, this icon is indicated when the memorized 
preferred operation is displayed.

CLR

SLEEP

SET

10

7

5
4

6

9

8

1

2

3

5-EN

+EH99950501.BOOK  Page 5  Thursday, June 18, 2015  10:57 AM

Summary of Contents for RBC-AX32UW-UL

















Reviews: