background image

– 24 –

EN

Installation Manual

Entering the model name and serial number

Enter the model name and serial number manually for the outdoor unit. Information data is loaded automatically 
for the indoor units. Enter the model name and serial number manually after replacing the circuit board to the 
service circuit board (unless entering information manually before replacement of the circuit board).

<Flow chart of usual process>

Entering the model name and serial number manually

Product

Model name and serial number display

Indoor unit

Information data is loaded automatically from the indoor unit and displayed.

Outdoor unit

Enter information manually on the remote controller.

Service circuit board

Enter information manually on the remote controller.

1

Push the [

 

 ] / [

 

 ] button to select 

“2. Outdoor model name” on the “Register 
service info.” screen, then push the 

 

Set”  [

 

F2] button.

Select “3. Outdoor unit serial No.” to enter the 
serial number of the outdoor unit.

Select “4. Indoor model name” to enter the 
model name of the indoor unit.

Select “5. Indoor unit serial No.” to enter the 
serial number of the indoor unit.

2

Push the [

 

 ] / [

 

 ] button to select 

“1. Manual model name input” on the 
“Outdoor model name” screen, then push 
the “

 Set” [

 

F2] button.

Select “1. Manual serial No. input” to enter the 
serial number of the outdoor unit.

Select “1. Manual model name input” to enter 
the model name of the indoor unit.

Select “1. Manual serial No. input” to enter the 
serial number of the indoor unit.

Does the indoor unit / outdoor unit automatically load information data of model 

name and serial number to the remote controller?

The model name and serial number loaded from the unit 

are displayed.

1. Manual entry is not needed.

2. Select “Indoor unit (Outdoor unit)” for the display mode 

(factory default).

1. Enter the model name and serial number of the unit 

manually on the remote controller.

2. Select “Remote controller” for the display mode.

Yes

No

1.Service contact tel No.

2.Outdoor model name

 

3.Outdoor unit serial No.
4.Indoor model name 
5.Indoor unit serial No.

Register service info.

Return

Set

Set

1.Manual model name input

2.Model name selection
Outdoor model name 
 

Outdoor model name

Return

Set

Fix

Set

Summary of Contents for RB-RWS21-E

































Reviews: