– 10 –
EN
◆
Cancel the timer operation
Press the CLR
button.
◆
Clock display
During the TIMER operation (ON-OFF, OFF-ON, OFF
timer) clock display is disappeared so as to show the
setting time. To see the present time, press SET button
briefly and the present time is displayed about 3
seconds.
High power operation
◆
High power (Hi POWER)
The Hi POWER (high power operation) mode
automatically controls room temperature, airflow and
operation mode so that the room is quickly cooled in
summer and warmed in winter.
◆
Setting Hi POWER mode
1
Hi POWER button
Press the Hi POWER button after starting any
operation. At the same time, the “Hi POWER”
mark on the remote controller is indicated.
◆
Cancelling Hi POWER mode
1
Hi POWER button
Press the Hi POWER button once again.
At the same time, the “Hi POWER” mark on the
remote controller goes out.
CAUTION
• The Hi POWER mode cannot be activated in the DRY
and FAN ONLY operation and when the ON TIMER
operation is reserved.
• Hi POWER mode is not available for group control.
When Hi POWER is transmitted to the Header indoor
unit, the receiving sound is heard but the Hi POWER
mode will not be performed. Please cancel the Hi
POWER mode.
CLR
PRESET
QUIET
SWING
FIX
Hi-POWER
COMFORT
SLEEP
MODE
TEMP
FAN
1
Quiet operation
The QUIET mode provides quiet operating status by
automatically setting the fan speed to the lowest
speed.
◆
Setting QUIET mode
1
QUIET button
Press the QUIET button after starting any
operation. At the same time, the
mark is
indicated.
◆
Cancelling QUIET mode
1
QUIET button
Press the QUIET button once again.
At the same time, the
mark on the remote
controller disappears.
• When the QUIET mode is cancelled, the fan
speed changes to AUTO. You can change it to
your preferred speed.
CAUTION
The QUIET mode cannot be activated in the DRY
operation.
NOTE
Under certain conditions, the quiet operation may not
provide adequate cooling or heating due to the feature of
quietness.
Preset Operation
Set your preferred operation mode for future use.
The setting is memorized by the unit for future
operation (except airflow direction).
Select your preferred operation.
1
Press the PRESET button for 3 seconds to
memorize the setting.
The
mark is displayed.
When you press this button next time, the
memorized operation mode will be enabled.
Comfort sleep operation
COMFORT SLEEP mode is a OFF timer operation with
automatic temperature and fan speed adjustment.
1
Press the COMFORT SLEEP button.
Select 1, 3, 5 or 9 hours for the OFF timer
operation.
CAUTION
The COMFORT SLEEP mode is not enabled in the DRY
or FAN ONLY operation.
PRESET
QUIET
SWING
FIX
Hi-POWER
COMFORT
SLEEP
MODE
TEMP
FAN
1
PRESET
TEMP
FAN
1
PRESET
QUIET
COMFORT
SLEEP
MODE
TEMP
FAN
1
19-EN
20-EN
+001111055901_01EN.book Page 10 Monday, September 5, 2011 2:23 PM
