1.4 JRA Capacity Measurement Mode (wired R/C only)
Preliminary operation
1
Press
,
, and
at the same time for 4 seconds or more in the OFF mode.
In the group control mode, the header unit number is displayed first.
2
Each pressing of
indicates indoor unit number in the group sequentially.
Choose the main indoor unit (connected to the outdoor unit) for which this control is to be performed.
The fan and flap of the selected indoor unit start working.
3
Specify DN “91” with
buttons.
4
Set the following data with
buttons. (Factory setting: 0000)
5
Press
Indication on the LCD shows normal operation.
6
Press
to return the operation mode to normal OFF.
Rating
Middle
Data
0001
0002
Cooling rating
Heating rating
Cooling middle
Heating middle
Operation
Cooling
Heating
Auto Cooling
Auto Cooling
Fan speed
Quick high
Quick high
Auto
Auto
Setting temp.
18°C
29°C
23°C
24°C
Flap position
Horizontal angle
Horizontal angle
Horizontal angle
Horizontal angle
Use this mode to measure JRA capacity.
Use this mode under the conditions of JIS B8615-1.
Perform the settings in the table by remote
controller.
Execution procedure
• Press
on the R/C.
To reexecute JRA capacity measurement, repeat steps from step
1
above.
Once this measurement is completed, the above setting is reset.
1.5 Function Select Setting (wired R/C only)
Perform the following steps in the operation OFF mode.
1
Press
,
, and
at the same time for 4 seconds or more in
the OFF mode.
In the group control mode, the header unit number is displayed
first.
2
Each pressing of
indicates indoor unit number in the group
sequentially.
Choose the main indoor unit (connected to the outdoor unit) this
function is to be performed.
The fan and flap of the selected indoor unit start working.
3
Specify DN with
buttons.
4
Set the setting data with
buttons.
5
Press
Indication on the LCD shows normal operation.
• To change the selected indoor unit, go to
2
.
• To change the item to be set, go to
3
.
6
Press
to return the operation mode to normal OFF.
6
2
3
5
1
4
1
2
3
4
5
6
Operation procedure
END
–
56
–
