FIX
AIR FLOW
1
INDOOR UNIT DISPLAY
Press : Move the louver
in the desired vertical direction.
Press : Move the
louver in the desired horizontal
direction.
Press : For select
louver swing operation.
Press
: To select provided air flow direction
Wide
center
Wide
right
Wide
left
Spot
left
Spot
right
Return to
manually setting
Spot
center
Note:
●
Do not move the louver manually by hands or others.
●
The louver may automation positioning by some operation mode.
Note:
●
The provided Remote Controller is a wireless type, which also can be
used as a wire. Please see “How to Connect The Remote Controller
for Wired Operation”, located in installation instruction, in case of wired
control is required.
●
In wire operation, remote controller will return to initial condition
(PRESET, TIMER and CLOCK will return to initial condition) when user
shutdown power supply of Air conditioner.
1
Infrared signal emitter
2
Start/Stop button (
)
3
Mode select button (
)
4
Temperature button (
)
5
Fan speed button (
)
6
Swing louver button (
)
7
Set louver Up-Down button (
)
8
On timer button ( )
9
Off timer button (
)
0
Setup button (
)
!
Clear button (
)
@
Memory and Preset button (
)
#
AIR FLOW selection button (
)
$
High power button (
)
%
Economy button (
)
^
Set louver Left-Right button (
)
&
Comfort sleep button ( )
*
Filter reset button ( )
(
Set clock button ( )
)
Check button ( )
-
Reset button ( )
2
PREPARATION BEFORE USE
3
1
2
3
4
AIR FLOW DIRECTION
4
REMOTE CONTROL
5
AUTOMATIC OPERATION
6
COOLING / HEATING / FAN ONLY
OPERATION
7
DRY OPERATION
8
Hi-POWER OPERATION
● Display brightness can be adjusted, follow procedure on
!
.
Require Wireless LAN connecting adapter which available as
accessory.
1
3
4
5
2
1
ECO (White)
2
Wi-Fi access (White)
3
Hi-Power (White)
4
Timer (White)
5
Operation (White)
Preparing Filters
1. Open the air inlet grille and remove the air filters.
2. Attach the filters. (see detail in the accessory sheet).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Vertical
(Up-Down)
Swing
Swing off
Pi
Pi
Pi Pi
Horizontal
(Left-Right)
Swing
Up-Down
Left-Right
Swing
● Vertical (Up-Down) swing
● Horizontal (Left-Right) swing
“Pi” sound when air flow direction is set and “Pi Pi” sound when
air flow direction is canceled and return to manually setting.
1
4
@
2
3
7
#
%
8
&
)
(
6
5
^
$
!
9
0
-
*
Clock Setup
1. Push
by tip of the pencil.
If timer indication is flashing, go to the next step 2.
2. Press
or
: adjust the time.
3. Press
: Set the time.
Remote Control Reset
Push
by tip of the pencil or
1. Remove the batteries.
2. Press
.
3. Insert the batteries.
To automatically select cooling, heating, or fan only operation
1. Press
: Select Auto A.
2. Press
: Set the desired temperature. Min. 17°C, Max. 30°C,
3. Press
: Select AUTO, LOW
, LOW+
, MED
,
MED+
, HIGH
or Quiet .
1. Press
: Select Cool , Heat
, or Fan only
.
2. Press
: Set the desired temperature.
Min. 17°C, Max. 30°C,
Fan Only: No temperature indication
3. Press
: Select AUTO, LOW
, LOW+
, MED
,
MED+
, HIGH
or Quiet .
For dehumidification, a moderate cooling performance is controlled
automatically.
1. Press
: Select Dry .
2. Press
: Set the desired temperature. Min. 17°C, Max. 30°C.
To automatically control room temperature and airflow for faster cooling or
heating operation (except in DRY and FAN ONLY mode)
Press
: Start and stop the operation.
Note:
Dry mode fan speed is set to Auto only.
1120650261_00_S01_182x257_12p_S_p70_190712.indd 3
12-07-19 2:47:13 PM
