二
三
二
Component Parts
G
匠
Louver
Water Tank
Control Panel
Back Cover
Handle
Air Intake
Drainage
Outlet
Cord Tie
Caster
�
Water
Tank
Water Tank Lid
Water Tank Handle
Float
Water Tank
Do not remove the Float from the Water Tank, or
otherwise the Dehumidifier cannot detect the
water level that may cause leakage and
malfunction.
4
Installation setting
Keep enough space around the Dehumidifier to ensure effective
operation. Please place the Unit according to the specifications
shown in the diagram to the right. Insufficient space may
impact on the performance of the Dehumidifier
_
• Drain the Water Tank before use
• Minimise the frequency of opening and closing doors
and windows to save energy.
• Keep enough space around the Dehumidifier.
Allow at least 50cm of air space above the Unit and
at least 20 cm on four sides, as shown in the diagram.
• Operating noise: It is recommended to place the
Dehumidifier on top of a mat or rubber slab to reduce
vibration and noise, which may also prevent creating
carpet depression or dents on wood flooring
At least:20cm
/
'
At least:20cm
尸
=
,,
At least:20cm
(Cont.)5
勹
--+-
厂
Summary of Contents for RAD-X200H
