201
If Something Goes Wrong
Develop good computing habits
Follow these steps to back up your computer or files to optical
discs, or a storage drive:
You cannot back up the computer while running on battery power.
Connect the AC adaptor before continuing.
1
Prepare your backup target by connecting it and/or inserting a
blank optical disc in the drive.
2
Click
Start
.
3
Click
Control Panel
.
4
Click
Back up your computer
under the
System and
Security
heading. Follow the on-screen instructions to back up
your files.
For more help, click
Start
,
Help and Support
, and search for
“back up files.”
General tips for installing hardware and software
Here are a few tips to help ensure safe and easy installation of new
hardware (printers, pointing devices, external hard drives, optical
disc drive writers, scanners, etc.) and software (applications like
Microsoft
®
Office and Adobe
®
Photoshop
®
, or utility software such
as special toolbars for your web browser).
❖
Create a restore point (refer to
with restore points” on page 199
). Before installing anything,
use the System Restore utility to set a restore point (see the
section titled restore points). If anything goes wrong, you will
then be able to easily restore the Windows
®
operating system to
the state it was in prior to the installation, undoing any changes
that the installation process introduced.
❖
Back up your critical data (see
entire computer with the Windows
❖
Have your back up DVD(s) on hand in case you need any files
from them.
❖
Do not guess
-
follow directions carefully! It is often necessary
to run an installation utility first
-
before connecting a new
hardware item to the computer. If the device is connected first,
it may be very difficult to complete the installation
successfully. Always carefully follow the installation
instructions that accompany the hardware or software.
NOTE
